메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
남충우 (자동차부품연구원) 이호길 (자동차부품연구원) 김재광 (모토닉 기술연구소) 김재경 (모토닉 기술연구소) 이준혁 (모토닉 기술연구소) 전완재 (모토닉 기술연구소)
저널정보
한국자동차공학회 한국자동차공학회논문집 한국자동차공학회논문집 제27권 제6호
발행연도
2019.6
수록면
447 - 454 (8page)
DOI
10.7467/KSAE.2019.27.6.447

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
With the worsening energy crisis and environment pollution, a higher-efficiency internal combustion engine with lower emissions is crucial for engine manufacturers. Gas fuels like natural gas and hydrogen are currently regarded as promising alternative fuels whose use can resolve both the aforementioned problems, and there industry and engine research centers are exerting much effort to make these gas fuels viable for use in engines. This work was motivated by the desire to gain further insights into the characteristics of the low-pressure gas jet. Experimental gas jet investigation was successfully conducted through the schlieren technique, using a solenoid-valve injector with a maximum injection pressure of 0.8 MPa(absolute pressure) driven by a standard injector driver. Its supply voltage is 12 V, and its opening time, 1.4 ms. The injection pressure has a significant effect on the jet penetration. Also, a higher injection pressure leads to longer jet tip penetration. A high injection pressure leads to a higher jet momentum and higher turbulence energy, which means that the fuel-air mixing rate can be increased by increasing the injection pressure. The research results will be used to support the authors’ ongoing low-pressure injection natural gas engine project.

목차

Abstract
1. 서론
2. 실험 장치 구성 및 방법
3. 실험 결과 및 고찰
4. 결론
References

참고문헌 (10)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-556-000682244