메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
배현우 (Seoul National University of Science of Technology) 유인수 (Seoul National University of Science of Technology) 성재용 (Seoul National University of Science of Technology) 이명호 (Seoul National University of Science of Technology)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조학회지 Vol.28 No.6
발행연도
2019.12
수록면
419 - 425 (7page)
DOI
10.7735/ksmte.2019.28.6.419

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Self-entrainment of air occurs when water is supplied through a venturi nozzle with an air hole in its throat. To study the characteristics of air entrainment, the air flow rates and air volume ratio were measured. The flow inside the nozzle was visualized for various diverging angles and water flow rates. The results shows that air entrainment increases with the water flow rate; however, the air volume ratio remains almost constant. Furthermore, air entrainment is the highest at a diverging angle of 40°. As the water flows downstream, an annular, two-phase flow starts to form in the diverging section, changing the flow pattern to a churn flow. This sudden expansion in the diverging section induces a vortex separation that blocks the pathway of air entrainment when air bubbles are present in the vortex.

목차

ABSTRACT
1. 서론
2. 실험방법
3. 결과 및 고찰
4. 결론
References

참고문헌 (17)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-003-000103085