메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국태양에너지학회 한국태양에너지학회 학술대회논문집 한국태양에너지학회 2004 Proceedings ISEA Asia-Pacific
발행연도
2004.10
수록면
491 - 495 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The present buried contact solar cell (BCSC) research at SERI includes the development of a processing sequence suitable for the production of the single sided (SS) BC solar cells. This paper presents some results for large area (45㎠) SSBC cells fabricated on FZ and CZ silicon substrates. Cell efficiencies in excess of 18% fabricated on FZ, p-type, 0.5 ohm-em, and over 16% on CZ p-type, 1-20 ohm-em, wafers have been demonstrated. Both the FZ and CZ wafers were chemically textured. These results are preliminary and the exploration of double sided (DS) sequence, which is the future BC structure would lead to over 17% and 20% efficiency cells on CZ and FZ substrates respectively. The cost of solar cells can be reduced further if the many high temperature steps can be reduced to only one. This would be very advantageous to poor quality substrates such as the CZ grown wafers.

목차

Abstract

1. Introduction

2. Comparison of SSBC and DSBC structures

3. Cell fabrication

4. Results and discussion

5. One high temperature processing sequence

6. Conclusion

Acknowledgement

References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-563-018203546