지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2020.6
- 수록면
- 51 - 59 (9page)
- DOI
- 10.17548/ksaf.2020.06.30.51
이용수
초록· 키워드
오류제보하기
The purpose of this study was to mention the matters regarding the formative characteristics and artistic value of ceramic works based on an actual ceramic object made by the researcher, which was printed using ceramic material using 3D printing technology, and a digital video used for projection mapping.
To this end, a case study of 3D-printed ceramic works and projection mapping were carried out, and an analysis was conducted based on the intention, production, and exhibition of the actual object produced by the researcher.
The findings and details were as follows:
First, focusing specifically on the geometry of the researchers’ ceramic work, the intention was to highlight morphological changes in simple yet differentiated units through a combination of dynamic and static structures used simultaneously.
Second, in order to demonstrate the media combination in addition to the above, an attempt was made to make the viewing of the ceramic work a more immersive experience by layering video images on top of the ceramic object.
Results of such analysis established that the object, consisting of geometric figures, exhibited extensibility as a three-dimensional work which existed in a complementary and relative manner that postulated the concepts of dynamic and static domains, while video mapping could be expected not only to improve an audience’s concentration but also draw forth development of a formative pattern that expands possibilities within the ceramics field.
It is expected that new value will continually be created in line with the advancing digital technology by applying a wide range of convergences within digital technology in the ceramics field.
To this end, a case study of 3D-printed ceramic works and projection mapping were carried out, and an analysis was conducted based on the intention, production, and exhibition of the actual object produced by the researcher.
The findings and details were as follows:
First, focusing specifically on the geometry of the researchers’ ceramic work, the intention was to highlight morphological changes in simple yet differentiated units through a combination of dynamic and static structures used simultaneously.
Second, in order to demonstrate the media combination in addition to the above, an attempt was made to make the viewing of the ceramic work a more immersive experience by layering video images on top of the ceramic object.
Results of such analysis established that the object, consisting of geometric figures, exhibited extensibility as a three-dimensional work which existed in a complementary and relative manner that postulated the concepts of dynamic and static domains, while video mapping could be expected not only to improve an audience’s concentration but also draw forth development of a formative pattern that expands possibilities within the ceramics field.
It is expected that new value will continually be created in line with the advancing digital technology by applying a wide range of convergences within digital technology in the ceramics field.
목차
Abstract
I. Introduction
II. Theoretical Background
Ⅲ. A Work Produced by Convergence of 3D Ceramic Printing and Projection Mapping Techniques
Ⅴ. Conclusion and Suggestions
Reference
참고문헌 (16)
참고문헌 신청
최정화 / 2019 / 3D 프린팅 기술을 융합한 도자디자인 사례 연구 / 디지털융복합연구 17(4):309~317
정진원 / 2017 / 3D 프린팅 기법과 도자기법 비교를 통한 적층이미지 연구 / 한국도자학연구 14(3):165~181
김현창 / 2015 / 3D프린팅이 사회․경제에 미치는 영향에 관한 연구 / 디지털융복합연구 13(7):23~31
김세영 / 2018 / 3D 프린터를 활용한 소규모 비즈니스 모델 제안 : 유아동 선글라스를 중심으로 / 디지털융복합연구 16(11):455~464
김원석 / 2017 / 실루엣기법과 전사기법을 활용한 융복합적 도자 표현 연구 / 디지털융복합연구 15(12):495~502
정진원 / 2017 / 3D 프린팅 기법과 도자기법 비교를 통한 적층이미지 연구 / 한국도자학연구 14(3):165~181
김현창 / 2015 / 3D프린팅이 사회․경제에 미치는 영향에 관한 연구 / 디지털융복합연구 13(7):23~31
김세영 / 2018 / 3D 프린터를 활용한 소규모 비즈니스 모델 제안 : 유아동 선글라스를 중심으로 / 디지털융복합연구 16(11):455~464
김원석 / 2017 / 실루엣기법과 전사기법을 활용한 융복합적 도자 표현 연구 / 디지털융복합연구 15(12):495~502
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Suggestion for creative idea frame of ceramic collaboration education through design thinking
한국과학예술융합학회
2021 .06
-
3D 프린팅 기술을 융합한 도자디자인 사례 연구
디지털융복합연구
2019 .01
-
Study on the Tracking Type Projection Mapping on Moving Objects
한국콘텐츠학회 ICCC 논문집
2016 .12
-
Ceramic Spoon 17-01
International Digital Design Invitation Exhibition
2017 .05
-
디자인매체와 융합을 통한 전통도자조형 확장 연구
한국과학예술융합학회
2020 .12
-
A Study on Real-Time Projection Mapping for Rotation Object
한국콘텐츠학회 ICCC 논문집
2015 .12
-
퍼포먼스와 융합을 통한 현대 도예의 수행적 사례 연구
한국융합학회논문지
2022 .04
-
#An Elephant in the Ceramic Museum
International Digital Design Invitation Exhibition
2022 .12
-
Exploring the Integration of Yangjiabu Woodblock New Year Picture Color Language in Contemporary Chinese Ceramic Decoration
아시아태평양융합연구교류논문지
2024 .08
-
디자인 교육을 위한 인터랙티브 프로젝션 맵핑
차세대컨버전스정보서비스기술논문지
2015 .01
-
증강현실의 기술동향과 도자제품의 적용방안에 관한 연구
한국과학예술융합학회
2015 .03
-
가상 이미지 정합을 이용한 프로젝션 매핑 기반의 예술적 표현에 관한 연구
한국HCI학회 학술대회
2017 .02
-
A Study on the Convergence Contents of Projection Mapping in China
디지털융복합연구
2018 .01
-
Extensibility of Visual Expression in Projection Mapping Installation Art; Focused on Examples and Projection Mapping Installation Artwork Domino
한국융합학회논문지
2021 .11
-
프로젝션 매핑 영상미디어를 통한 실내공간의 장소성 연출에 관한 융합디자인 연구
한국과학예술융합학회
2019 .12
-
Co-Cr 합금의 금속-도재 결합 강도
한국콘텐츠학회논문지
2021 .03
-
Ceramic Coating Frypan
International Digital Design Invitation Exhibition
2018 .05
-
A Ceramic & Glass Cruet
International Digital Design Invitation Exhibition
2015 .07
-
프로젝션 매핑에서 피사체의 재질 차이에 따른 사용자 경험 연구
한국과학예술융합학회
2023 .01
-
중국전통 전지공예와 현대도자장식의 융합에 대한 연구
디지털융복합연구
2020 .01
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2020-600-000875905