메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
JaeCheol Park (Korea Institute of Industrial Technology)
저널정보
한국표면공학회 한국표면공학회지 한국표면공학회지 제57권 제5호
발행연도
2024.10
수록면
379 - 385 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Al-Ag thin films with varying compositions were fabricated using a combinatorial sputtering system to develop highly sensitive SAW devices. The Al-Ag sample library exhibited a wide range of electrical resistivity and chemical compositions, providing valuable data for selecting optimal materials. Recognizing the significant influence of both resistivity and density of IDT electrodes on the generation of acoustic waves from piezoelectric materials, three types of Al-Ag thin films with different Al contents were fabricated, maintaining a consistent thickness of 150 nm. As the Al content decreased from 84.6 at% to 21.7 at%, the resistivity increased from 5.1 to 0.8 × 10<sup>-5</sup> Ω-cm, while the calculated density increased from 3.9 to 8.8 g/cm³. The SAW devices fabricated with these Al-Ag IDT electrodes resonated at 71 MHz without frequency shifts, but the resonant frequency selectivity and insertion loss deteriorated with decreasing Al content, highlighting the predominant influence of electrode density over electrical conductivity on SAW device performance.

목차

Abstract
1. Introduction
2. Experimental details
3. Results and discussion
4. Conclusion
Reference

참고문헌 (12)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-25-02-091038353