메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Jiao Han (Kunming Institute of Precious Metals) YiMing Zeng (Kunming Institute of Precious Metals) Ying Song (Harbin Institute of Technology) HongQuan Liu (Shandong University of Science and Technology)
저널정보
대한금속·재료학회 Electronic Materials Letters Electronic Materials Letters Vol.15 No.3
발행연도
2019.1
수록면
278 - 286 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
SrTiO 3 fi bers were fabricated by an in situ hydrothermal method using hydrated TiO 2 fi bers as both template and reactant. La 0.1 Dy 0.1 Sr 0.75 TiO 3 powders containing x wt.% SrTiO 3 fi bers ( x = 0, 1, 3, 5) were prepared by the sol–gel method andthen sintered at 1450 °C under a reducing atmosphere (N 2 /H 2 = 95/5). XRD analysis showed that the samples were mainlycomposed of SrTiO 3 phase and a few Dy 2 Ti 2 O 7 phase. TiO 2 phase was detected in the samples with x = 3 and x = 5, and itspeak intensity clearly reinforced with increasing x . With the addition of SrTiO 3 fi bers, the electrical conductivity increasedsignifi cantly and the Seebeck coeffi cient kept almost unchanged, resulting in a high power factor of 1015 μW m −1 K −2 at200 °C with a loading of 3 wt.% SrTiO 3 fi bers. Meanwhile, combined with low thermal conductivity, the sample with 3 wt.%SrTiO 3 fi bers showed the peak ZT value of 0.19 at 500 °C, which was 127% higher than that of La 0.1 Dy 0.1 Sr 0.75 TiO 3 .

목차

등록된 정보가 없습니다.

참고문헌 (27)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0