메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
정지연 (Seoul National University of Science and Technology) 조영학 (Seoul National University of Science and Technology) 황지홍 (Seoul National University of Science and Technology)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조학회지 Vol.27 No.6
발행연도
2018.12
수록면
517 - 523 (7page)
DOI
10.7735/ksmte.2018.27.6.517

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The presence of steps on the surface of a product is a typical example of deteriorating product quality. Therefore, it is required to lower their heights to a level that a human cannot perceive. In this context, the present study focuses on experimentally measuring the minimum perceptible step height (absolute threshold). For this purpose, step samples with heights less than 3 μm were made from silicon wafers using a microelectromechanical systems (MEMS) fabrication technique with an accuracy under 10 nm. The experiment was performed using the method of constant stimuli. The participants were instructed to touch the samples using their index fingers, and then answer whether they perceived the steps or not. After analyzing the data statistically, it was concluded that the absolute threshold is about 1.35 μm when the finger moves in the direction parallel to the finger and about 2.04 μm in the direction perpendicular to the finger.

목차

ABSTRACT
1. 서론
2. 시편 제작 및 측정
3. 단차 인지 촉감 평가
4. 결론
References

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-003-000144569