메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
천희준 (부산대학교) 이재훈 (부산대학교) 이재철 (부산대학교) 박성훈 (부산대학교)
저널정보
(사)한국CDE학회 한국CDE학회 학술발표회 논문집 한국CADCAM학회 2010 학술발표회 논문집
발행연도
2010.1
수록면
678 - 682 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
An automated container-stacking system(ACSS) for Mobile Harbor functions to arrange and stack containers loaded to Mobile Harbor from a container ship through the main crane of Mobile Harbor. The current paper focuses on the design of an anti-derail module in the ACSS of Mobile Harbor, and the anti-derail module consists of three driving components and an anti-derail component. Finite element analysis (FEA) of three driving components exhibited that the largest von Mises stresses occurred around the connecting hole between the three components of the anti-derail module. The values of maximum von Mises stresses for the three main components were 210MPa, 165MPa, 78MPa, respectively, which were lower than the allowable stress of a SM490Y material (243MPa). The allowable stress was computed from the yield stress of a SM490Y material (365MPa) divided by a factor of safety (1.5). Future plan is to change the design of this component to decrease the maximum stress less than the allowable stress, and further to perform FEA by considering the maximum dynamic load applied to the anti-derail device.

목차

ABSTRACT
1. 서론
2. 프레임 모듈 이송부 구성요소
3. 레일-이탈 방지 모듈 구성요소
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2015-500-001133357