지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2002.10
- 수록면
- 1,387 - 1,393 (7page)
이용수
초록· 키워드
오류제보하기
The measurement of velocity and stain rate field has been conducted in opposed impinging jet combustion.
When a smaller diameter (5mm) orifice of pre-chamber was used. previous studies had reported that the combustion phase showed a shift from weak turbulent combustion to moderate turbulent combustion in the modified Borghi Diagram. In the case with smaller orifice diameter (5mm). NOx emission was substantially reduced by a factor 1/2 while the combustion pressure remains at the same as that in the conventional combustion. Hence. in this study. the experiment setup using PIV technique was designed to identify the relation of the strain rate distribution and NOx reduction associated with moderate turbulent combustion. As a result. it was found that the highly strained pockets are widely distributed during the combustion in the middle of chamber when the orifice diameter is 5mm. And the corresponding PDF distribution of strain rates sho ws the smoothly distributed strain rate within the range of │ ±1000│ (1/sec) rather than a spike shape about zero point. This is the unique feature observed in the combustion with 5mm orifice diameter. Therefore, it can be concluded that the substantial NOx reduction in opposed impinging combustor is mainly attributed to the strain rate distribution within the range of │±1000│ resulting in the combustion phase shift to moderate turbulent combustion.
When a smaller diameter (5mm) orifice of pre-chamber was used. previous studies had reported that the combustion phase showed a shift from weak turbulent combustion to moderate turbulent combustion in the modified Borghi Diagram. In the case with smaller orifice diameter (5mm). NOx emission was substantially reduced by a factor 1/2 while the combustion pressure remains at the same as that in the conventional combustion. Hence. in this study. the experiment setup using PIV technique was designed to identify the relation of the strain rate distribution and NOx reduction associated with moderate turbulent combustion. As a result. it was found that the highly strained pockets are widely distributed during the combustion in the middle of chamber when the orifice diameter is 5mm. And the corresponding PDF distribution of strain rates sho ws the smoothly distributed strain rate within the range of │ ±1000│ (1/sec) rather than a spike shape about zero point. This is the unique feature observed in the combustion with 5mm orifice diameter. Therefore, it can be concluded that the substantial NOx reduction in opposed impinging combustor is mainly attributed to the strain rate distribution within the range of │±1000│ resulting in the combustion phase shift to moderate turbulent combustion.
목차
Abstract
1.서론
2.실험장치 및 방법
3.토의 및 결과
4.결론
참고문헌
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
[論文] 對向噴出焰 燃燒方式에 依한 NOx 生成低減과 燃燒特性 硏究(Ⅰ)¹
오토저널
1988 .02
-
대향분출염 화염방식에 의산 NOx 생성저감과 연소특성(Ⅲ)
한국자동차공학회논문집
1996 .03
-
연소 장치들에서의 동적 연소 특성
KOSCO SYMPOSIUM 논문집
2011 .05
-
연소장치에서 발생하는 고주파 연소 불안정 특성
한국연소학회지
2012 .03
-
대향분출 연소기의 난류화염 구조
KOSCO SYMPOSIUM 논문집
2002 .01
-
Turbulent Combustion in SI Engines
한국자동차공학회 기타 간행물
1998 .11
-
대향 분출염 연소방식의 NOx 저감기구에 관한 실험적연구
한국자동차공학회 춘 추계 학술대회 논문집
1996 .06
-
성층급기 연소현상에 관한 수치적 연구
한국자동차공학회논문집
2007 .09
-
정적 연소실내의 메탄-공기 혼합기의 연소 특성에 관한 연구
한국자동차공학회논문집
1996 .07
-
정적 연소실내 혼합기 분포와 연소특성에 미치는 영향에 관한 실험적 연구
한국자동차공학회논문집
2004 .05
-
ANALYSIS OF DIRECT INJECTION SI STRATIFIED COMBUSTION IN HYDROGEN LEAN MIXTURE - COMBUSTION PROMOTION AND COOLING LOSS BY HYDROGEN -
International journal of automotive technology
2001 .09
-
압축착화 디젤엔진의 연소위상 검출방법에 관한 연구
융ㆍ복합기술연구소 논문집
2019 .01
-
정적연소기를 이용한 메탄의 연소특성
한국자동차공학회 Symposium
2002 .11
-
[디젤엔진부문] Offset-대향 분출염에 의한 NOx 저감
한국자동차공학회 춘 추계 학술대회 논문집
1999 .11
-
RI-CNG 엔진에서 연료 분사시기 및 공기과잉률에 따른 연소특성의 고찰
한국동력기계공학회 학술대회 논문집
2007 .06
-
A Simulation Analysis on the Effect of the Change in Cavity Profile on the Inner Cylinder Flow and Combustion Characteristics
한국자동차공학회 춘 추계 학술대회 논문집
2006 .11
-
연소실 형상에 따른 연소 및 배기가스 배출물 특성에 관한 연구
한국자동차공학회논문집
2004 .01
-
Combustion Control of Self-Excited Combustion Oscillation and NOx Reduction by Forced Pulsating Mixture Supply
Environmental Engineering Research
2004 .12
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-550-014042597