지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.11
- 수록면
- 4,780 - 4,792 (13page)
- DOI
- 10.1007/s12540-020-00768-9
이용수
초록· 키워드
오류제보하기
The Al/hard chrome/Al laminate with cracked interlayer was processed by single-pass rolling and accumulative roll bonding(ARB). A micro-cracked hard chrome with the thickness range of 5?15 μm was deposited on the Al layer by the electroplatingprocess. The micro-cracked hard chrome layer was considered as a model material to investigate the deformationprocessing of the metal laminate with a discontinuous interlayer. The layered composite with discontinuous interlayer wasmodeled by finite element analysis. Three configurations of discontinuities, including the longitudinal, transverse, andrectangular pattern, were considered in the interlayer. In agreement with the experiments, the simulation results showedthat during the roll bonding process, the discontinuities that are oriented transversely spread in the rolling direction whilethose that are located longitudinally slightly expand in the transverse direction. The peeling test after the single roll bondingrevealed that the bond strength of the Al/Cr composite with cracked interlayer increased with increasing the thicknessreduction and decreasing the hard chrome layer. The hard chrome layer was gradually fragmented during the ARB processand was distributed in the Al matrix.
목차
등록된 정보가 없습니다.
참고문헌 (46)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Investigation of bonding properties of Al/Cu bimetallic laminates fabricated by the asymmetric roll bonding techniques
Advances in computational design
2019 .01
-
Bonding evolution of bimetallic Al/Cu laminates fabricated by asymmetric roll bonding
Advances in materials research : AMR
2019 .01
-
압연접합시 알루미늄 합금판재의 초미세립 생성 거동 분석
한국소성가공학회 학술대회 논문집
2024 .10
-
롤투롤 연속공정 시스템의 권취롤 내부응력 해석
한국정밀공학회 학술발표대회 논문집
2015 .05
-
공정 변수를 고려한 Roll-to-Roll 슬롯-다이 코팅 층 두께 예측 모델 개발
한국정밀공학회 학술발표대회 논문집
2020 .09
-
Inter‑diffusion Based Analytical Model for Growth Kinetics of IMC Layers at Roll Bonded Cu/Al Interface During Annealing Process
Metals and Materials International
2020 .01
-
다이나믹 Roll-to-Roll 3D 프린팅 시스템 설계
한국정밀공학회 학술발표대회 논문집
2020 .09
-
Fabrication of Multi-Functional Laminate Sheet by Roll Bonding Process
한국소성가공학회 학술대회 논문집
2015 .10
-
Interface Morphology and Mechanical Properties of Al-Cu-Al Laminated Composites Fabricated by Explosive Welding and Subsequent Rolling Process
Metals and Materials International
2016 .01
-
Effect of operating conditions on adhesion strength of Al/Al₂O₃ produced by surface activated bonding
한국표면공학회 학술발표회 초록집
2016 .11
-
Interfacial Layers Evolution During Annealing in Ti-Al Multi-Laminated Composite Processed Using Hot Press and Roll Bonding
Metals and Materials International
2016 .01
-
Transverse cracking based numerical analysis and its effects on cross-ply laminates strength under thermo-mechanical degradation
Structural engineering and mechanics : An international journal
2016 .01
-
습식 에칭 공정에서의 과산화수소 이상반응에 대한 안전 대책 및 제어에 관한 연구
한국산학기술학회 논문지
2018 .04
-
Microwave Plasma System for Roll-to-Roll Processing
대한전기학회 학술대회 논문집
2017 .10
-
Effect of Volume Fraction of Ti on Microstructure Evolution and Thermal Properties of Al/Ti Laminated Composites
Metals and Materials International
2024 .04
-
Pass Schedule Design to reduce Surface Defects on workpiece in large-scale rolling process
한국소성가공학회 학술대회 논문집
2021 .05
-
롤투롤 권취 공정 시 롤 내부 응력에 의한 코팅층 표면 결함 분석
대한기계학회 춘추학술대회
2022 .05
-
Crack behaviour of top layer in layered rocks
Geomechanics & engineering
2018 .01
-
On transverse matrix cracking in composite laminates loaded in flexure under transient hygrothermal conditions
Structural engineering and mechanics : An international journal
2018 .01
-
Bonding Strength of 3D printed Concrete reinforced by Interlayer Reinforcements
대한토목학회 학술대회
2021 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0