지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
등록된 정보가 없습니다.
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
Investigation of bonding properties of Al/Cu bimetallic laminates fabricated by the asymmetric roll bonding techniques
Advances in computational design
2019 .01
Bonding evolution of bimetallic Al/Cu laminates fabricated by asymmetric roll bonding
Advances in materials research : AMR
2019 .01
압연접합시 알루미늄 합금판재의 초미세립 생성 거동 분석
한국소성가공학회 학술대회 논문집
2024 .10
Prediction of Poisson's ratio degradation in hygrothermal aged and cracked [θm/90n]s composite laminates
Steel and Composite Structures, An International Journal
2016 .01
Interfacial Reaction in Twin-Roll Cast AA1100/409L Clad Sheet During Different Sequence of Cold Rolling and Annealing
Metals and Materials International
2021 .01
소형 선박용 AA5052판재의 냉간접합압연공정에 의한 기계적 특성 향상
대한용접·접합학회지
2024 .10
냉간압연접합법에 의해 제조된 층상 복합판재의 열처리 조건별 미세조직 및 기계적 특성 평가 비교 분석
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .05
Differential Speed Rolling of Twin-Roll-Cast 6xxx Al Alloy Strips and Its Influence on the Sheet Formability
Metals and Materials International
2016 .01
이종소재 접합방법 별 접합강도 특성
한국기계가공학회 춘추계학술대회 논문집
2020 .06
냉간압연접합법에 의한 자동차 히터 튜브용 알루미늄 클래드재 개발
한국자동차공학회 춘계학술대회
2015 .05
사이드 형상가공을 통한 와이어 평압연 성형성 향상을 통한 연구
한국생산제조학회 학술발표대회 논문집
2017 .12
Al 합금 판재의 열간 비대칭 압연과 성형성 변화
한국소성가공학회 학술대회 논문집
2016 .10
Driving Forces of Silver Nano-porous Sheet Die Bonding at 145 °C and 175 °C in the Air
마이크로전자 및 패키징학회지
2024 .09
Influence of Microstructure and Mechanical Properties on Formability in High Strain Rate Rolled AZ31 Magnesium Alloy Sheets
Metals and Materials International
2022 .06
롤 본딩된 Ti/Al/Ti 3-ply 다층금속 판재의 접합강도 향상을 위한 최적 후열처리 조건 도출
소성·가공
2022 .08
Fabrication and Interface Structural Behavior of Mg/Al Thickness-Oriented Bonding Sheet via Direct Extrusion
Metals and Materials International
2022 .08
롤투롤 연속공정 시스템의 권취롤 내부응력 해석
한국정밀공학회 학술발표대회 논문집
2015 .05
Manufacture of Dash Panel Using Laminated Aluminum Vibration Damping Sheets
한국소성가공학회 학술대회 논문집
2022 .12
박판주조 및 압연 공정을 이용한 고강도 Al-Zn-Mg-Cu 합금 판재제조
한국소성가공학회 학술대회 논문집
2019 .10
Estimation of Composite Laminate Design Allowables Using the Statistical Characteristics of Lamina Level Test Data
International Journal of Aeronautical and Space Sciences
2015 .09
0