메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김준형 (한국산업기술대학교) 김형관 (한국산업기술대학교) 이호년 (한국생산기술연구원) 김현종 (한국생산기술연구원) 이희철 (한국산업기술대학교)
저널정보
한국표면공학회 한국표면공학회지 한국표면공학회지 제50권 제5호
발행연도
2017.10
수록면
411 - 420 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this paper, two methods of making the Pd-added SnO₂ (Pd-SnO₂) powder with pure tetragonal phase by the hydrazine method were suggested and compared in terms of crystal structure, surface morphology, and alcohol gas response. One of the addition methods is to use PdCl₂ as a Pd source, the other is to use Pd-based organic with oleylamine (OAM). When Pd concentration was increased from 0 to 5 wt%, the average grain size of Pd-SnO₂ made with Pd-OAM were decreased from 32 to 12 nm. In the case of using with PdCl2, grain size of the PdCl₂ fell to less than 10 nm. However, agglomerated and extruded surface morphology was observed for the films with Pd addition over 4 wt%. The crack-free Pd-SnO₂ thick films were able to successfully fill the 30 μm gap of patterned Pt electrodes by optimized ink dropping method. Also, the 2 wt% Pd-SnO₂ thick film made with PdCl₂ showed gas responses (R<SUB>air</SUB>/R<SUB>gas</SUB>) of 3.7, 5.7 and 9.0 at alcohol concentrations of 10, 50 and 100 ppm, respectively. On the other hand, the prepared 3 wt% Pd-SnO₂ thick film with Pd-OAM exhibited very excellent responses of 3.4, 6.8 and 12.2 at the equivalent measurement conditions, respectively. The 3 wt% Pd-SnO₂ thick film with Pd-OAM has a specific surface area of 31.39 m²/g.

목차

Abstract
1. 서론
2. 실험방법
3. 실험결과 및 토의
4. 결론
References

참고문헌 (22)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-581-001463260