메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Chul Jin Kim (세종대학교) Hee Sun Han (세종대학교) YuanGang Wang (세종대학교) Chae Hoon Sohn (세종대학교)
저널정보
한국추진공학회 한국추진공학회 학술대회논문집 한국추진공학회 2016년도 제46회 춘계학술대회 논문집
발행연도
2016.5
수록면
228 - 231 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Two parts of numerical work are included in the present paper. The first part is about a numerical study on shock tube by changing the diameter ratio of low-pressure part, i.e. driven part, to high-pressure part, i.e. driver part. Five cases are considered where the diameter ratios of driven part to driver part are 40%, 50%, 60%, 80%, and 100%, respectively. In the 100% ratio case, diameters of driven part and driver part are the same at 66.9 mm. And, this value is determined by the size of the shock tube which was designed. As the diameter ratio changes, five cases are analyzed numerically. The second part shows the comparison of test time with ignition delay time. The test time is calculated numerically with the 100% ratio case. And, the ignition delay time is from the literatures. Test time is shown to be longer than ignition delay time.

목차

ABSTRACT
1. Introduction
2. Numerical method
3. Results
4. Conclusion
Reference

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-558-000659134