메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Hyun‑Seop Shin (Korea Institute of Civil Engineering and Building Technology (KICT)) Sung‑Wook Kim (Korea Institute of Civil Engineering and Building Technology (KICT)) Jae‑Heum Moon (Korea Institute of Civil Engineering and Building Technology (KICT)) Gang‑Kyu Park (Korea Institute of Civil Engineering and Building Technology (KICT))
저널정보
한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.18 No.4
발행연도
2024.7
수록면
741 - 757 (17page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In an explosion test using a shock tube, the behavior of pressure waves can be reproduced with high reliability. However, the explosion in a shock tube occurs in a confined space. It is difficult to predict the behavior of pressure waves and its effect on various concrete specimens by using the research findings related to free-field explosions. Moreover, few studies have focused on explosive-driven shock tubes. In this study, the behavior of pressure waves in a shock tube was numerically analyzed using a finite-element analysis program. The explosive used to generate the pressure waves was an ammonium nitrate fuel oil (ANFO), which exhibits non-ideal explosion characteristics. The Jones–Wilkins–Lee (JWL) and ignition-and-growth (I&G) equations of state were used for blast-pressure calculation. The analysis results were affected by factors such as the release rate of explosive energy and the development of the pressure waves in the confined explosion. The blast behaviors, such as the low release rate of explosive energy and the resulting increase in the impulse, were analyzed using the ignition-and-growth equation. The impulse produced during the development of waves reflected by the block installed at the tube inlet exceeded that produced by the tube wall. Such behaviors that occurred at the beginning of a blast affected the process of wave propagation along the shock tube and the wave reflection due to the test specimen at the outlet of the shock tube. In this study, the blast behavior in the shock tube, which could be referenced for the analysis of blast overpressure and its effect on concrete specimens, was numerically analyzed. Further research on the structural behaviors of concrete specimens due to blast overpressure is needed.

목차

Abstract
1 Introduction
2 Equations of State for Blast‑Pressure Calculation
3 Description of Finite‑Element Model
4 Results
5 Discussion
6 Conclusion
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

최근 본 자료

전체보기

댓글(0)

0