메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Hyeon Cheol Kim (울산대학교) Kukjin Chun (서울대학교) Joonyeop Lee (서울대학교)
저널정보
대한전자공학회 ICEIC : International Conference on Electronics, Informations and Communications ICEIC : 2008
발행연도
2008.6
수록면
1,000 - 1,003 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this work, the effects of metal dimension and substrates to MEMS inductors characteristics have been studied. The suspended spiral inductors were fabricated by MEMS technologies with micro electroplating and thick film photolithography. The inductors were suspended by 20 ㎛ over the substrate to reduce the substrate coupling loss and have 10 ㎛ thick metal layer to reduce the ohmic loss. The measured quality factor of inductors fabricated on silicon substrate was over 20 at 2 ㎓. These inductors also fabricated and measured on various substrates such as high resistive silicon, glass, and quartz wafer. The quality factor of inductor fabricated on glass substrate was almost 30 at 4 ㎓ and that of inductor fabricated on quartz wafer was over 40 at same frequency region. Substrate resistance is the most important factor to the inductor performance to realize the inductors on quartz highest quality factors.

목차

Abstract
1. Introduction
2. Fabrication
3. Results and discussion
4. Conclusions
Acknowledgments
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2012-569-004333665