메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한전기학회 전기학회논문지 C 전기학회논문지 제55C권 제7호
발행연도
2006.7
수록면
339 - 343 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, the variations of the important characteristics of solenoid-type RF chip inductors utilizing a low-loss Al₂O₃ core material on inductor dimensions were investigated systematically. Four dimensions of the chip inductors fabricated in this work were 1.0×0.5×0.5 ㎣, 1.5×1.0×0.7 ㎣, 2.1×1.5×1.0 ㎣, and 2.4×2.0×1.4 ㎣ and copper (Cu) wire with 40 ㎛ diameter was used as the coils. High frequency characteristics of the inductance, quality factor, and impedance of developed inductors as a function of inductor dimensions were measured using an RF Impedance/Material Analyzer (HP4291B with HP16193A test fixture). It was observed that the developed inductors with the number of turns of 6 have the inductance (L) of 12 to 82 nH and exhibit the self-resonant frequency (SRF) of 3.6 to 1.2 ㎓. The SRF of inductors decreases with increasing the inductor size while the L increases with the inductor size. The smallest inductors of 1.0×0.5×0.5 ㎣ exhibited the L of 12 nH, SRF of 3.6 ㎓, and the quality factor of 67 near the frequency of 1.1 ㎓. The calculated data predicted the high-frequency data of the L, and Q of the developed inductors well.

목차

Abstract
1. 서론
2. 실험
3. 결과 및 고찰
4. 결론
감사의 글
참고문헌
저자소개

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-560-018835487