지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2024.6
- 수록면
- 1,224 - 1,228 (5page)
이용수
초록· 키워드
오류제보하기
In this study, the production and defect rate between the two processes were compared and analyzed by converting the existing manual assembly process to an automated process for the manufacturing process of the anti-shaking support, which is an earthquake-resistant product of firefighting facilities. In the manual process, it was identified as a problem of assembly failure due to loss of erroneous parts due to mistakes by workers or assembly of defective parts, and an automatic assembly vision inspection was applied to improve the problem.
By comparing the manual and automation processes of the assembly process, the work time and number of workers were compared and analyzed. In the manual assembly process, the daily production amount was 3,840 sets/8h, 7.5 seconds per set, and after the introduction of the automation system, the daily production amount was 5,630 sets/11h, which was 7.03 seconds, which was 6.3% reduced compared to manual work. Defect assembly was prevented by automatic discharge of defective parts through vision system inspection, and as a result of reviewing process defects due to loss of parts and poor assembly through automation of assembly and vision inspection after assembly, quality stability was improved by 0.20% for manual work and 0.00% for process defects after introduction of the automation system. In addition, a safe workplace was established by preventing safety accidents that may occur due to accumulation of workers' fatigue due to repeated work and long-term work, and preventing musculoskeletal diseases that are at risk of occurrence of transporting high-weight parts.
By comparing the manual and automation processes of the assembly process, the work time and number of workers were compared and analyzed. In the manual assembly process, the daily production amount was 3,840 sets/8h, 7.5 seconds per set, and after the introduction of the automation system, the daily production amount was 5,630 sets/11h, which was 7.03 seconds, which was 6.3% reduced compared to manual work. Defect assembly was prevented by automatic discharge of defective parts through vision system inspection, and as a result of reviewing process defects due to loss of parts and poor assembly through automation of assembly and vision inspection after assembly, quality stability was improved by 0.20% for manual work and 0.00% for process defects after introduction of the automation system. In addition, a safe workplace was established by preventing safety accidents that may occur due to accumulation of workers' fatigue due to repeated work and long-term work, and preventing musculoskeletal diseases that are at risk of occurrence of transporting high-weight parts.
목차
Abstract
1. 서론
2. 기존 수작업 및 자동화 생산공정
3. 조립공정 자동화 시스템
4. 결론
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Data-based Assembly Failure State Estimation of mobile IT parts using a 6 DOF manipulator
제어로봇시스템학회 국제학술대회 논문집
2018 .10
-
베어링 조립용 자동화 시스템 설계
한국기계가공학회 춘추계학술대회 논문집
2021 .12
-
다발 하네스 케이블 조립 자동화 시스템 구현을 위한 메커니즘 설계
국방로봇학회 논문집
2025 .01
-
소방배관 흔들림 방지 버팀대 자동화 공정 기술 개발
한국생산제조학회 학술발표대회 논문집
2024 .12
-
2D 비전과 3D 동작인식을 결합한 하이브리드 실시간 모니터링 시스템
멀티미디어학회논문지
2015 .05
-
Automation Methodology for Unmanned Assembly Processes using Task Oriented Optimal Assembly Graph
한국정밀공학회 학술발표대회 논문집
2017 .12
-
다발 하네스 케이블-하우징 간 조립 자동화 공정 시스템
한국정밀공학회 학술발표대회 논문집
2023 .11
-
볼조인트 조립 공정에서의 제품불량 예측 및 원인진단 모델 개발
한국생산제조학회 학술발표대회 논문집
2020 .12
-
Feasibility Research on Development of Product-Independent Assembly Complexity Model : A Case Study of a Refrigerator
Industrial Engineering & Management Systems
2018 .06
-
상용 산업용 로봇에 적용 가능한 조립용 그리퍼 개발
한국생산제조학회지
2020 .12
-
Integration of Computer Vision for Human-robot Collaboration in Manual Assembly Station
대한산업공학회 추계학술대회 논문집
2018 .11
-
Industrial AI for Yield Improvement in Camera Module Assembly Process
대한산업공학회 춘계공동학술대회 논문집
2023 .05
-
변위센서 기반 조립 상태 판별을 이용한 전기 커넥터 조립 기술
제어로봇시스템학회 국내학술대회 논문집
2019 .05
-
나사 조립 방식의 자동차 부품(제품)의 조립 조건 최적화를 위한 조립 토크 및 축력 변형 경향성 연구
한국자동차공학회 춘계학술대회
2023 .05
-
Realization and Scheduling of Free Spot Assembly Method for Machine Tools Using Cooperative Industrial Robots
Journal of the Korean Society for Precision Engineering
2023 .04
-
Scheduling for Assembly Line with Human-Robot Collaboration
Journal of the Korean Society for Precision Engineering
2023 .02
-
로봇이용 엔진피스톤 조립자동화를 위한 힘제어 기반의 조립방법
제어로봇시스템학회 국내학술대회 논문집
2015 .05
-
Molecular Self-Assembly in Cellular Milieu
한국고분자학회 학술대회 연구논문 초록집
2021 .04
-
원격운용통제탄 볼 자동공급 및 정렬 시스템 개발
한국생산제조학회지
2021 .04
-
클러치용 고정밀 플레이트 조립자동화생산 Buffer의 구조 해석
한국기계가공학회 춘추계학술대회 논문집
2021 .12
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-151-25-02-092219405