본 연구에서는 물성개선제로 활용하는 젤란검 첨가가 탈지대두분말을 이용한 식물조직단백(Texturized Vegetable Protein, TVP)의 품질특성에 미치는 영향을 살펴보았다. 식물조직단백 원료의 배합은 탈지대두분말 50%, 글루텐 30%, 옥수수전분 20%를 기본배합으로 하였다. 젤란검은 기본 배합 중량 대비 0, 0.5, 1.0, 1.5, 2.0% 비율로 첨가하였다. 압출성형은 냉각 다이(die)가 장착된 압출성형기를 이용하여 배럴온도 190℃, 스크루 회전속도 250 rpm, 수분은 정량펌프 9 rpm 속도로 주입하였다. 탈지대두분말 식물조직단백 단면은 젤란검 1.0% 첨가구 이상에서 층상구조가 증가하고 선명하였다. 젤란검 1.0-1.5% 첨가구에서 경도, 씹힘성이 증가하였고, 색도는 젤란검 첨가로 인해 적색과 황색이 진해지고 밝기가 낮아지는 것를 알 수 있었다. 수분흡수력과 탁도는 젤란검1.5-2.0% 첨가구에서 유의적으로 낮게 나타났다. 이와 같은 결과는 젤란검의 필름형성력과 조직화 특성에 따른 것으로서 탈지대두분말 식물조직단백 제조 시 젤란검 첨가량은 1.5%가 적절할 것으로 판단된다. 국산 탈지대두를 이용한 식물조직단백 제조에 젤란검 첨가는 조직감을 개선할 수 있는 첨가제의 역할을 할 수 있을 것으로 사료되며, 지금까지 수입에만 의존하고 있는 식물조직단백의 주 원료인 분리대두단백을 국산 탈지대두로 대체할 수 있는 가능성을 확인하였다.
The effects of gellan gum (a texture improver) on the quality characteristics of texturized vegetable protein (TVP) prepared from defatted soybean flour were herein investigated. The base TVP mixture consisted of 50% defatted soybean flour, 30% gluten, and 20% corn starch. Gellan gum was incorporated at concentrations of 0, 0.5, 1.0, 1.5, and 2.0% relative to the weight of the base mixture. Extrusion molding was conducted using an extruder equipped with a cooling die, with a barrel temperature set at 190℃, a screw rotation speed of 250 rpm, and water injected at a metering pump speed of 9 rpm. The appearance of the layered structure improved and became more distinct with addition of 1.0% gellan gum. Addition of 1.0-1.5% gellan gum resulted in significant increases in hardness and chewiness. Chromaticity also increased with increasing amounts of gellan gum. Water absorption capacity and turbidity notably decreased when 1.5- 2.0% gellan gum was added. These results can be attributed to the film formation properties and fibrous texture of the gellan gum. These studies indicate that a gellan gum concentration of approximately 1.5% is optimal.