지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2024.10
- 수록면
- 493 - 501 (9page)
이용수
초록· 키워드
오류제보하기
This study proposes an effective visualization method for image distortion in high-resolution, machinable Fresnel mirrors, which offer significant advantages over traditional convex mirrors by being thinner and lighter. While commercial optical design programs are excellent at optimizing aberrations, they have some limitations in visualizing images from complex optical configurations. Therefore, NX<SUP>TM</SUP> CAD software is employed to achieve photorealistic ray-traced visualization with high-fidelity image rendering due to its flexible two-dimensional and three-dimensional modeling environments. In comparative simulations with various mirror profiles, we identified an aspherical Fresnel mirror with a conic constant of k = -3 that can reduce distortion to 1.79%, according to Zemax OpticStudio<SUP>®</SUP> calculations. Finally, the NX<SUP>TM</SUP> software successfully validated the distortion image of our machinable aspherical Fresnel mirror design. Subsequent practical experiments validated the consistency between the predicted distortion and the actual visualization results. We anticipate that this specialized visualization technique holds the potential to radically transform the interactive design of optical systems that incorporate aspherical Fresnel mirrors.
목차
I. INTRODUCTION
II. DESIGN AND SIMULATION
III. RESULTS AND DISCUSSION
IV. CONCLUSION
REFERENCES
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Representation of fresnel functions in continued fractions
Proceedings of the Jangjeon Mathematical Society
2024 .04
-
Design of a Fresnel Lens for a Solar End-pumped Solid-state Laser
Current Optics and Photonics
2020 .10
-
Design of a Tele-centric Wide Field Lens with High Relative Illumination and Low Distortion Using Third-order Aberration Analysis
Current Optics and Photonics
2015 .12
-
Simulation of an X-ray Fresnel Zone Plate with Nonideal Factors
Current Optics and Photonics
2020 .02
-
Optical Design of an Image-space Telecentric Two-mirror System for Wide-field Line Imaging
Current Optics and Photonics
2017 .08
-
Design of Dynamically Focus-switchable Fresnel Zone Plates Based on Plasmonic Phase-change VO₂ Metafilm Absorbers
Current Optics and Photonics
2023 .06
-
Optical-Loss Measurement of a Silicon-Slab Waveguide
Current Optics and Photonics
2020 .12
-
Opto-mechanical Design of Monocrystalline Silicon Mirror for a Reflective Imaging Optical System
Current Optics and Photonics
2022 .06
-
A Study on Image Distortion of 3D-T1-SPACE with Gd Contrast Agent
Journal of Magnetics
2022 .12
-
ITER 톰슨산란 진단계 및 first mirror 건전성 기술 추적 및 관련 실험 진행사항
한국진공학회 학술발표회초록집
2016 .02
-
Optical System Design for a Head-up Display Using Aberration Analysis of an Off-axis Two-mirror System
Current Optics and Photonics
2016 .08
-
대구경 등대등을 위한 Fresnel Lens의 설계 및 제작에 관한 연구
새물리
2022 .12
-
Q-Polynomial을 이용한 Korsch 망원경의 비구면 공차 분석 방법 연구
한국광학회지
2020 .01
-
Q-Polynomial을 이용한 Korsch 망원경의 비구면 공차 분석 방법 연구
한국광학회지
2020 .12
-
Photorealistic Ray-traced Visualization of Manufacturing Tolerances of Freeform Vehicle Side Mirror
Current Optics and Photonics
2020 .12
-
Analytical Study of the Image Reconstruction of Fourier Holograms Using Varifocal Electric-Field-Driven Liquid Crystal Fresnel Lenses
Current Optics and Photonics
2020 .04
-
Image Authentication Using Only Partial Phase Information from a Double-Random-Phase-Encrypted Image in the Fresnel Domain
Current Optics and Photonics
2015 .06
-
프레넬 렌즈를 이용한 항공장애등 광학계 최적 설계
한국광학회지
2021 .02
-
Forbes 비구면을 사용한 스마트폰 카메라렌즈의 설계
한국광학회지
2017 .08
-
New Bending System Using a Segmented Vacuum Chuck for Stressed Mirror Polishing of Thin Mirrors
Current Optics and Photonics
2017 .12
최근 본 자료
댓글(0)
0