지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2017.12
- 수록면
- 618 - 625 (8page)
이용수
초록· 키워드
오류제보하기
In the present research, a new bending system using a segmented vacuum chuck for Stressed MirrorPolishing (SMP) is developed. SMP is a special fabrication method for thin aspheric mirrors, where simpleflat or spherical fabrication is applied while a mirror blank is deflected. Since a mirror blank is usuallyglued to a bending fixture in the conventional SMP process, there are drawbacks such as long curingtime, inconvenience of mirror replacement, risk of mirror breakage, and stress concentration near the gluedarea. To resolve the drawbacks, a new bending system is designed to effectively hold a mirror blank byvacuum. For the developed bending system, the optimal bending load to achieve the designated mirrordeflection is found by finite element analysis and an optimization algorithm. With the measurement resultsof the deflected mirror surfaces with the optimal bending loads, the feasibility of the developed bendingsystem is investigated. As a result, it is shown that the bending system is appropriate for the SMP process.
목차
등록된 정보가 없습니다.
참고문헌 (6)
참고문헌 신청
G. Lemaltre / 1972 / New procedure for making schmidt corrector plates / Appl. Opt 11(7):1630~1636
J. Lubliner / 1980 / Stressed mirror polishing. 1 : A technique for producing nonaxisymmetric mirrors / Appl. Opt 19(14):2332~2340
J. E. Nelson / 1980 / Stressed mirror polishing. 2 : Fabrication of an offaxis section of a paraboloid / Appl. Opt 19(14):2341~2352
J. Z. Bo / 2015 / Influence and control of spherical aberration in polishing off-axis aspherical mirrors by the stressed method / Appl. Opt 54(2):291~298
L. Xin-nan / 2012 / Study on the stressed mirror polishing with a continuous polishing machine for large aperture off-axis aspheric mirrors / Chin. Astron. Astrophys 36(4):435~444
J. Lubliner / 1980 / Stressed mirror polishing. 1 : A technique for producing nonaxisymmetric mirrors / Appl. Opt 19(14):2332~2340
J. E. Nelson / 1980 / Stressed mirror polishing. 2 : Fabrication of an offaxis section of a paraboloid / Appl. Opt 19(14):2341~2352
J. Z. Bo / 2015 / Influence and control of spherical aberration in polishing off-axis aspherical mirrors by the stressed method / Appl. Opt 54(2):291~298
L. Xin-nan / 2012 / Study on the stressed mirror polishing with a continuous polishing machine for large aperture off-axis aspheric mirrors / Chin. Astron. Astrophys 36(4):435~444
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Optical-Loss Measurement of a Silicon-Slab Waveguide
Current Optics and Photonics
2020 .12
-
Optical Design of an Image-space Telecentric Two-mirror System for Wide-field Line Imaging
Current Optics and Photonics
2017 .08
-
Opto-mechanical Design of Monocrystalline Silicon Mirror for a Reflective Imaging Optical System
Current Optics and Photonics
2022 .06
-
ITER 톰슨산란 진단계 및 first mirror 건전성 기술 추적 및 관련 실험 진행사항
한국진공학회 학술발표회초록집
2016 .02
-
A Novel Axial Foldable Mechanism for a Segmented Primary Mirror of Space Telescope
Journal of Astronomy and Space Sciences
2015 .09
-
Ring isomorphisms between closed strings via homological mirror symmetry
대한수학회지
2022 .03
-
Optical System Design for a Head-up Display Using Aberration Analysis of an Off-axis Two-mirror System
Current Optics and Photonics
2016 .08
-
Design of All-SiC Lightweight Secondary and Tertiary Mirrors for Use in Spaceborne Telescopes
Current Optics and Photonics
2022 .02
-
Bending effect of magnetic thin films
한국자기학회 학술연구발표회 논문개요집
2023 .05
-
A Coaxial and Off-axial Integrated Three-mirror Optical System with High Resolution and Large Field of View
Current Optics and Photonics
2016 .02
-
Ti2O3 -TiO2 thin films as for heat mirror
한국진공학회 학술발표회초록집
2020 .02
-
Impeded frictional aging by the presence of experimental fault mirror
대한지질학회 학술대회
2016 .10
-
ITER 레이저 진단계 및 First mirror 관련 기술추적 및 감마선오염 미러 특성 연구
한국진공학회 학술발표회초록집
2017 .02
-
Development of a thin-film deposition system for X-ray mirror coating
한국진공학회 학술발표회초록집
2021 .02
-
Comparison of mirror functors of elliptic curves via LG/CY correspondence
대한수학회지
2020 .01
-
Integrated Modeling for the Design of Deformable Mirrors Using a Parametric Module Method
Current Optics and Photonics
2015 .10
-
탄소중립 역행하는 ‘SMP 상한제’ 철회가 답 : 논란의 SMP 상한제
월간환경
2022 .08
-
ECR plasma heating parameters in mirror and cusp configurations
한국진공학회 학술발표회초록집
2020 .02
-
Wide Field-of-View Imaging Using a Combined Hyperbolic Mirror
Current Optics and Photonics
2017 .08
-
광자빔의 집속이 가능한 Bendable KB 거울장치 개발
한국진공학회 학술발표회초록집
2019 .08
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2023-425-000230694