지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2023.5
- 수록면
- 1,323 - 1,333 (11page)
- DOI
- 10.1007/s12540-022-01310-9
이용수
초록· 키워드
오류제보하기
Noteworthy ductility Mg-8Gd-4Y-1Nd-0.5Si (wt.%) alloy with a strong non-basal texture was developed by 12 passes ofmulti-directional forging (MDF) combine with extrusion. The slip trace analysis indicated that deformation mechanism after3 passes of MDF and extrusion were basal < a > , pyramidal < a > and pyramidal < c + a > slips. The intensity of non-basaltexture increased from 5.37 to 8.03 with the MDF passes increased from 3 to 12, which means grain orientation tends tobe more consistent and makes the basal < a > slips easy to pass through grain boundaries to accommodate ductility. Withmore basal < a > slips crossing the grain boundaries, dislocation interaction in grain interior caused stress accumulation,exceeding the critical shear stress (CRSS) of slips with low schmidt factor (SF), and multiple slips appeared. The activationof slip cross grain boundary and multiple slip improved the elongation from 14.7% to 25.6% of MDFs-extruded Mg-8Gd-4Y-1Nd-0.5Si alloy.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Developing a High Ductility Mg Alloy Via Non-basal Slips and Intergranular Coordination Induced by Li and Er Addition
Metals and Materials International
2024 .07
-
2차 차수 미끄럼 모델을 이용한 원형제트 분사각 변화에 대한 수치적 연구
한국전산유체공학회 학술대회논문집
2019 .05
-
Influence of Li Addition on the Microstructures and Mechanical Properties of Mg–Li Alloys
Metals and Materials International
2021 .01
-
퍼지제어기와 전류센싱방법을 이용한 모바일 로봇의 Slip현상 추정 및 주행성능 향상
제어로봇시스템학회 논문지
2017 .04
-
Microstructure and Mechanical Properties of Severely Deformed Eutectic Al–Si–Cu–Mn Alloy
Metals and Materials International
2023 .04
-
전기 자동차 발진 시 발생하는 Slip 현상 분석
한국자동차공학회 추계학술대회 및 전시회
2019 .11
-
Slip 및 No-Slip CFD 조건을 사용한 지구재진입 캡슐 주변의 희박 유동 효과 해석
한국전산유체공학회 학술대회논문집
2023 .05
-
Influence of Extrusion Ratio on Microstructure and Tensile Properties of Mg–Gd–Y–Zn–Zr Alloy
Metals and Materials International
2024 .07
-
Microstructure and Mechanical Properties of Mg–2.0Gd–1.2Y–1.0Zn–0.2Zr Alloy
Metals and Materials International
2021 .01
-
Research on Optimal Feedback Tracking Control of TCS Slip Ratio of High Speed Vehicle in Complex Road Conditions
제어로봇시스템학회 국제학술대회 논문집
2019 .10
-
Ultra-High Strength Mg-9Gd-4Y-0.5Zr Alloy with Bi-Modal Structure Processed by Traditional Extrusion
Metals and Materials International
2016 .01
-
Influence of Forging Temperature on the Microstructures and Mechanical Properties of a Multi-Directionally Forged Al?Cu?Li Alloy
Metals and Materials International
2022 .02
-
Implementation of Integrated Dual SLIP Dynamics for Sagittal plane motion of Quadruped Robot
제어로봇시스템학회 국제학술대회 논문집
2020 .10
-
Influence of δ' Phase with GP?I Zones Fillings on Slip Behavior and Cold Rolling Texture in AA2099
Metals and Materials International
2021 .09
-
Slip Observer Based Slip Tracking Control Using Adhesion Friction Coefficient For Anti-lock Brake Systems
제어로봇시스템학회 국내학술대회 논문집
2019 .05
-
A Design of Prototype 1C2M Railway Vehicle Propulsion Control System Considering Slip Reduction of Traction Motor
Journal of Electrical Engineering & Technology
2015 .01
-
Effect of Extrusion Temperature on Mechanical Properties of AZ91 Alloy in Terms of Microstructure and Texture Development
Metals and Materials International
2021 .01
-
Microstructure Evolution and Dynamic Precipitation Behavior of Mg?10Gd?4Y?1Sm?0.5Zr Alloy During Backward Hot Extrusion
Metals and Materials International
2021 .09
-
Using Solution Heat Treatment and Multi Directional Forging to Improve the Mechanical and Corrosion Properties of an Mg–2Zn–0.2Ag Alloy
Metals and Materials International
2024 .06
-
분리층의 상대 변위를 이용한 고분자 미끄럼 촉각 센서 개발
로봇학회 논문지
2016 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0