메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Zhaoyun Xu (Xi’an Jiaotong University) Yaming Zhang (Xi’an Jiaotong University) Bo Wang (Xi’an Jiaotong University) Jian-feng Yang (Xi’an Jiaotong University) Kaikai Liu (Xi’an Jiaotong University)
저널정보
한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제17권 제8호
발행연도
2016.8
수록면
840 - 844 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Porous Si3N4 ceramics with varied porosities were prepared by liquid phase sintering of fibrous α-Si3N4 powder with differentmorphology after ball milling. The influence of the ball milling time on porosity, shrinkage, microstructure and mechanicalproperties of Si3N4 ceramics were investigated. With increasing of the ball milling time from 0 h to 24 hrs, the mean length andaspect ratio of the fibrous α-Si3N4 particles decreased dramatically, resulting in the porosity of porous Si3N4 ceramics decreasedfrom 55.6% to 19.3%. With the decreased length of the fibrous α-Si3N4 particles, microstructures with decreased aspect ratioof β-Si3N4 grains were formed, as a result of increased nuclei number and limited grain growth of the β-Si3N4 grains. Theflexural strength varied from 62 MPa to 205 MPa could be obtained attributed to the synergy effect of porosity andmicrostructure.

목차

등록된 정보가 없습니다.

참고문헌 (27)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0