지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제17권 제6호
- 발행연도
- 2016.6
- 수록면
- 591 - 595 (5page)
이용수
초록· 키워드
오류제보하기
The grain size of (W,Ti)C powder remarkably decreases with a high-energy ball milling. The rapid sintering of nanostructured(W,Ti)C and (W,Ti)C-5 vol.%CNT hard materials was investigated with high frequency induction heating. The advantage ofthis process is that it allows very quick densification to near theoretical density and prohibition of grain growth innanostructured materials. A dense nanostructured (W,Ti)C and (W,Ti)C-5 vol.%CNT hard material with a relative density ofup to 99% was produced with simultaneous application of 80 MPa pressure and induced output current with total powercapacity of 15 kW within 3 minutes. The effect of CNT on the sintering behavior and mechanical properties of (W,Ti)C wasinvestigated. The fracture toughness of (W,Ti)C increased by addition of CNT.
목차
등록된 정보가 없습니다.
참고문헌 (21)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Solid-state sintering mechanism of blended elemental Ti-6Al-4V powders
한국분말야금학회지
2018 .01
-
Wear behavior of irregular shape Ti6Al4V powder reinforced with carbon nanotubes
Journal of Ceramic Processing Research
2020 .01
-
Effects of Y and Ti addition on microstructure stability and tensile properties of reduced activation ferritic/martensitic steel
Nuclear Engineering and Technology
2019 .01
-
Hydroxyapatite를 대체하여 말뼈를 첨가한 Ti-20Mo-0.5EB의 미세조직과 기계적 특성
한국분말야금학회지
2021 .10
-
Enhanced mechanical properties of nanostructured (W,Ti)C-FeAl hard materials rapidly sintered by the pulsed current activated heating
Journal of Ceramic Processing Research
2016 .08
-
Ti-Based Solid Solution Carbonitrides Prepared From Ti-Alloy Scraps via a Hydrogenation-Dehydrogenation Process and High-Energy Milling
Metals and Materials International
2015 .01
-
Simultaneously synthesis and sintering of a nanostructured Ti-Al2O3 composite by pulsed current activated heating
Journal of Ceramic Processing Research
2016 .06
-
Microstructure and Mechanical Features of Electron Beam Welded Dissimilar Titanium Alloys: Ti–10V–2Fe–3Al and Ti–6Al–4V
Metals and Materials International
2019 .01
-
Ti 적층을 이용한 Ni-Ti 계 판재의 양방향 형상기억 기능성 개선 연구
소성·가공
2024 .10
-
CNTs 합성을 통해 향상된 비표면적을 갖는 Ti 다공체의 제조
한국분말야금학회지
2016 .01
-
Rapid Synthesis and Consolidation of Nanostructured Ti-TiC Composites from TiH<sub>2</sub> and CNT by Pulsed Current Activated Heating
한국재료학회지
2015 .01
-
Fabrication of Al?Ti?B Grain Refiner Using Machining Ti Chips, Reaction Mechanisms and Grain Refinement Performance in Pure Al
Metals and Materials International
2022 .06
-
Influence of post-heat treatment on the interface-correlated bonding properties of roll-bonded 3-ply Ti/Al/Ti metallic sheets
한국소성가공학회 학술대회 논문집
2021 .11
-
Microstructure and Refinement Performance of Al-Ti-C Master Alloy: Effect of Excess Ti on the Growth and Nucleating Ability of TiC Particles
Metals and Materials International
2017 .01
-
Low-Temperature Synthesis and Characterization of Ti2AlC/TiAl in situ Composites via a Reaction Hot-Pressing Process in the Ti3AlC2-Ti-Al System
Metals and Materials International
2015 .01
-
CNT 함량에 따른 CNT/Epoxy 복합재료 제작 및 모드 1 파괴 인성 평가
한국수소및신에너지학회논문집
2021 .02
-
IR 시퀀스의 TI 변화에 따른 MRI 영상 경향성 분석
대한전자공학회 학술대회
2021 .11
-
Effect of Volume Fraction of Ti on Microstructure Evolution and Thermal Properties of Al/Ti Laminated Composites
Metals and Materials International
2024 .04
-
Ti-6Al-4V 합금의 미세구조 분석
한국결정성장학회지
2016 .01
-
Rapid synthesis and consolidation of a nanostructured 3Ti-Al2O3 composite by HFIHS for biomedical application
Journal of Ceramic Processing Research
2016 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0