지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제21권 제5호
- 발행연도
- 2020.1
- 수록면
- 539 - 546 (8page)
이용수
초록· 키워드
오류제보하기
The purpose of this study was to investigate the sintering behavior, microstructural evolution, and the effect on wear resistanceof carbon nanotubes (CNT) with the addition of a mechanical alloy (Ti6Al4V) and sintered irregular Ti64 powder. Themechanical alloy powders utilized in this study were produced through the process of CIP (Cold Isostatic Press) in order toproduce samples by compress on under various pressures within a 300 MPa floating molded press. The samples were sinteredat a high vacuum (10-5 mbar) for 60 minutes at a temperature of 1275 oC. After sintering, the materials were characterizedusing an optic microscope (OM), scanning electron microscopy (SEM) and EDX (Energy-dispersive X-ray spectroscopy) todetermine whether the materials had wear resistance, density measurement, etc. The Carbon Nanotube wear and frictionbehavior were investigated under various conditions using a pin wear tester on a disc followed by a scanning electronmicroscopy (SEM) analysis. The objective of this study was to evaluate the density, metallographic properties and hardnessof Ti64 samples supplemented with different CNT ratios as a function of sintering temperature. Theoretical density and microhardnessof mechanical alloyed and sintered irregular Ti64 powders changed with the additions to CNT under increasedsintering temperatures.
목차
등록된 정보가 없습니다.
참고문헌 (28)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Solid-state sintering mechanism of blended elemental Ti-6Al-4V powders
한국분말야금학회지
2018 .01
-
Enhanced facture toughness of (W,Ti)C by addition of CNT
Journal of Ceramic Processing Research
2016 .06
-
금속분말 사출성형된 Ti-6Al-4V 합금의 미세조직 및 기계적 물성
소성·가공
2020 .10
-
Synthesis and Characterization of Ti50Ni(50−X)FeX Alloy Produced by Mechanical Alloying and Pressure-Less Sintering
Metals and Materials International
2023 .04
-
Effect of Mechanical Alloying and Sintering Environment on the Crystallographic Evolution, Microstructure, Mechanical and Corrosion Properties of Porous Ti4Al4Co Alloy
Metals and Materials International
2022 .06
-
Al-Ti-Si-Mo 복합재료분말의 방전 플라즈마 소결: 소결 거동, 미세조직 그리고 기계적 특성
한국정밀공학회 학술발표대회 논문집
2023 .05
-
Electrochemical and Spectroscopic Study on the Corrosion of Ti–5Al and Ti–5Al–5Cu in Chloride Solutions
Metals and Materials International
2019 .01
-
Investigation on Fabrication and Microstructure of Ti–6Al–4V Alloy Hollow Spheres by Powder Metallurgy
Metals and Materials International
2021 .01
-
Morphology after Nanotube Formation on Ti-6Al-4V Alloys by Several Steps
한국표면공학회 학술발표회 초록집
2017 .11
-
Characterization of Ti6Al4V–Ti6Al4V/30Ta Bilayer Components Processed by Powder Metallurgy for Biomedical Applications
Metals and Materials International
2020 .01
-
Selective Laser Melting 방식으로 적층가공된 Ti-6Al-4V 합금의 내마모성 특성에 미치는 고온 UNSM 처리 영향에 대한 연구
Tribology and Lubricants
2020 .02
-
Ti-Based Solid Solution Carbonitrides Prepared From Ti-Alloy Scraps via a Hydrogenation-Dehydrogenation Process and High-Energy Milling
Metals and Materials International
2015 .01
-
SLM기술로 적층가공된 Ti-6Al-4V 합금의 기계적 특성 및 내마모성 향상에 대한 연구
한국생산제조학회 학술발표대회 논문집
2018 .05
-
A Study of Electron Beam Welding Ratios on Dissimilar Titanium Alloys : Ti-10V-2Fe-3Al and Ti-6Al-4V
대한용접학회 특별강연 및 학술발표대회 개요집
2019 .05
-
Improvement of wear and tribological performance of Ti-6Al-4V alloy by laser processing of SiC nanoparticle coating
한국생산제조학회 학술발표대회 논문집
2020 .10
-
Ti-6Al-4V 합금의 미세구조 분석
한국결정성장학회지
2016 .01
-
Hydroxyapatite를 대체하여 말뼈를 첨가한 Ti-20Mo-0.5EB의 미세조직과 기계적 특성
한국분말야금학회지
2021 .10
-
Ti-Al 합금의 터닝 시 절삭성 평가를 위한 실험연구
한국정밀공학회 학술발표대회 논문집
2023 .11
-
Microstructure and Refinement Performance of Al-Ti-C Master Alloy: Effect of Excess Ti on the Growth and Nucleating Ability of TiC Particles
Metals and Materials International
2017 .01
-
Microstructure and Mechanical Features of Electron Beam Welded Dissimilar Titanium Alloys: Ti–10V–2Fe–3Al and Ti–6Al–4V
Metals and Materials International
2019 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0