지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
등록된 정보가 없습니다.
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
MRI에서 TI 변화에 따른 지방소거 정도에 대한 정량적 분석
전자공학회논문지
2018 .03
Effects of Y and Ti addition on microstructure stability and tensile properties of reduced activation ferritic/martensitic steel
Nuclear Engineering and Technology
2019 .01
Ti-Based Solid Solution Carbonitrides Prepared From Ti-Alloy Scraps via a Hydrogenation-Dehydrogenation Process and High-Energy Milling
Metals and Materials International
2015 .01
Microstructure and Mechanical Features of Electron Beam Welded Dissimilar Titanium Alloys: Ti–10V–2Fe–3Al and Ti–6Al–4V
Metals and Materials International
2019 .01
Ti 적층을 이용한 Ni-Ti 계 판재의 양방향 형상기억 기능성 개선 연구
소성·가공
2024 .10
Influence of post-heat treatment on the interface-correlated bonding properties of roll-bonded 3-ply Ti/Al/Ti metallic sheets
한국소성가공학회 학술대회 논문집
2021 .11
Ti-6Al-4V 합금의 미세구조 분석
한국결정성장학회지
2016 .01
Microstructure and Refinement Performance of Al-Ti-C Master Alloy: Effect of Excess Ti on the Growth and Nucleating Ability of TiC Particles
Metals and Materials International
2017 .01
A study on deducing optimal heat-treatment condition correlated to the generation of intermetallic compounds at joint interface of a Ti/Al/Ti 3-ply clad sheet
한국소성가공학회 학술대회 논문집
2022 .05
Effect of Volume Fraction of Ti on Microstructure Evolution and Thermal Properties of Al/Ti Laminated Composites
Metals and Materials International
2024 .04
N₂ 유량에 따른 BDD/TiNx/Ti 전극의 접착력 향상
한국표면공학회 학술발표회 초록집
2018 .11
Solid-state sintering mechanism of blended elemental Ti-6Al-4V powders
한국분말야금학회지
2018 .01
Fabrication of Al?Ti?B Grain Refiner Using Machining Ti Chips, Reaction Mechanisms and Grain Refinement Performance in Pure Al
Metals and Materials International
2022 .06
A Study of Electron Beam Welding Ratios on Dissimilar Titanium Alloys : Ti-10V-2Fe-3Al and Ti-6Al-4V
대한용접학회 특별강연 및 학술발표대회 개요집
2019 .05
온간단조 온도 범위에서 Ti-6Al-4V의 Ti 합금의 유동특성
한국소성가공학회 학술대회 논문집
2021 .11
Effects of Ti content on microstructure and wear resistance in Ni based WC-Co-Ti cladding layer
대한용접학회 특별강연 및 학술발표대회 개요집
2016 .04
3D Printing 이용한 Ti-6Al-4V 벌크헤드 제작방법 및 작업조건
한국항공우주학회 학술발표회 초록집
2022 .04
Electrochemical and Spectroscopic Study on the Corrosion of Ti–5Al and Ti–5Al–5Cu in Chloride Solutions
Metals and Materials International
2019 .01
유한요소법을 이용한 Ti-6Al-4V 의 선삭가공 최적화에 관한 연구
한국CDE학회 학술발표회 논문집
2015 .02
Ti 및 Ti-6Al-4V GTAW 클래딩의 미세조직 구성 및 상분석
대한용접·접합학회지
2020 .04
0