지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Structural Engineering and Mechanics, An Int'l Journal Structural Engineering and Mechanics, An Int'l Journal Vol.82 No.1
- 발행연도
- 2022.4
- 수록면
- 107 - 120 (14page)
이용수
초록· 키워드
오류제보하기
The bracing members capable of active control against seismic loads to reduce earthquake damage have been widely utilized in construction projects. Effectively reducing the structural damage caused by earthquake events, bracing systems equipped with retrofitting damper devices, which take advantage of the energy dissipation and impact absorption, have been widely used in practical construction sites. Shape Memory Alloys (SMAs) are a new generation of smart materials with the capability of recovering their predefined shape after experiencing a large strain. This is mainly due to the shape memory effects and the superelasticity of SMA. These properties make SMA an excellent alternative to be used in passive, semi-active, and active control systems in civil engineering applications. In this research, a new system in diagonal braces with slit damper combined with SMA is investigated. The diagonal element under the effect of tensile and compressive force turns to shear force in the slit damper and creates tension in the SMA. Therefore, by creating shear forces in the damper, it leads to yield and increases the energy absorption capacity of the system. The purpose of using SMA, in addition to increasing the stiffness and strength of the system, is to create reversibility for the system. According to the results, the highest capacity is related to the case where the ratio of the width of the middle section to the width of the end section (b1/b) is 1.0 and the ratio of the height of the middle part to the total height of the damper (h1/h) is 0.1. This is mainly because in this case, the damper section has the highest cross-section. In contrast, the lowest capacity is related to the case where b1/b=0.1 and the ratio h1/h=0.8.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Seismic vibration control of an innovative self-centering damper using confined SMA core
Smart Structures and Systems, An International Journal
2020 .01
-
A numerical study of a self-centring SMA damper
Structural Engineering and Mechanics, An Int＇l Journal
2021 .09
-
Numerical investigation on cyclic behaviour of superelastic shape memory alloy (SMA) dampers
Smart Structures and Systems, An International Journal
2021 .10
-
형상기억합금을 이용한 세탁기 댐퍼의 설계 및 성능고찰
한국소음진동공학회논문집
2018 .04
-
Improving the hysteretic behavior of Concentrically Braced Frame (CBF) by a proposed shear damper
Steel and Composite Structures, An International Journal
2019 .01
-
Parametric study of a new tuned mass damper with pre-strained SMA helical springs for vibration reduction
Smart Structures and Systems, An International Journal
2023 .01
-
Steel hexagonal damper-brace system for efficient seismic protection of structures
Steel and Composite Structures, An International Journal
2022 .12
-
SMA bar dampers using bending behavior combined with tension or compression
한국강구조학회 학술대회 발표집
2018 .05
-
Review of Types, Properties, and Importance of Ferrous Based Shape Memory Alloys
한국재료학회지
2018 .01
-
An Innovative shear link as damper: an experimental and numerical study
Steel and Composite Structures, An International Journal
2022 .02
-
SAFE댐퍼 보강골조의 구조성능 실험적 평가
한국공간구조학회지
2015 .01
-
Seismic behavior of properly designed CBFs equipped with NiTi SMA braces
Smart Structures and Systems, An International Journal
2018 .01
-
SMA 봉 및 와이어를 이용한 강재 슬릿 댐퍼의 내진성능 평가
한국강구조학회 학술대회 발표집
2020 .06
-
Seismic behavior of properly designed CBFs equipped with NiTi SMA braces
Smart structures and systems
2018 .01
-
A ductile steel damper-brace for low-damage framed structures
Steel and Composite Structures, An International Journal
2022 .08
-
Two-level control system of toggle braces having pipe damper and rotational friction damper
Structural Engineering and Mechanics, An Int＇l Journal
2023 .06
-
Research on a novel shear lead damper: Experiment study and design method
Steel and Composite Structures, An International Journal
2022 .12
-
X형 감쇠시스템을 위한 복원성 점성 감쇠기 성능 실험 및 수치모형 개발
한국안전학회지
2016 .01
-
브레이스형 마찰댐퍼로 보강된 철근콘크리트 골조의 비선형 해석
한국강구조학회 학술대회 발표집
2021 .06
-
슬릿형 강재이력 감쇠장치의 성능평가를 위한 실험연구
대한건축학회 논문집 - 구조계
2018 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0