지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2018.1
- 수록면
- 479 - 491 (13page)
이용수
초록· 키워드
오류제보하기
Shape memory alloys (SMA) exhibit superelasticity which refers to the capability of entirely recovering large deformation upon removal of applied forces and dissipating input energy during the cyclic loading reversals when the environment is above the austenite finish temperature. This property is increasingly favored by the earthquake engineering community, which is currently developing resilient structures with prompt recovery and affordable repair cost after earthquakes. Compared with the other SMAs, NiTi SMAs are widely deemed as the most promising candidate in earthquake engineering. This paper contributes to evaluate the seismic performance of properly designed concentrically braced frames (CBFs) equipped with NiTi SMA braces under earthquake ground motions corresponding to frequently-occurred, design-basis and maximum-considered earthquakes. An ad hoc seismic design approach that was previously developed for structures with idealized SMAs was introduced to size the building members, by explicitly considering the strain hardening characteristics of NiTi SMA particularly. The design procedure was conducted to compliant with a suite of ground motions associated with the hazard level of design-basis earthquake. A total of four six-story CBFs were designed by setting different ductility demands for SMA braces while designating with a same interstory drift target for the structural systems. The analytical results show that all the designed frames successfully met the prescribed seismic performance objectives, including targeted maximum interstory drift, uniform deformation demand over building height, eliminated residual deformation, controlled floor acceleration, and slight damage in the main frame. In addition, this study indicates that the strain hardening behavior does not necessarily impose undesirable impact on the global seismic performance of CBFs with SMA braces.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Seismic behavior of properly designed CBFs equipped with NiTi SMA braces
Smart Structures and Systems, An International Journal
2018 .01
-
Temperature effect on seismic performance of CBFs equipped with SMA braces
Smart structures and systems
2018 .01
-
Temperature effect on seismic performance of CBFs equipped with SMA braces
Smart Structures and Systems, An International Journal
2018 .01
-
Performance based assessment of shape memory alloy braces combined with buckling restrained braces in frames subjected to near field earthquakes
Steel and Composite Structures, An International Journal
2021 .11
-
Parametric study of SMA helical spring braces for the seismic resistance of a frame structure
Smart Structures and Systems, An International Journal
2020 .01
-
Seismic response of RC structures rehabilitated with SMA under near-field earthquakes
Structural engineering and mechanics : An international journal
2017 .01
-
Review of Types, Properties, and Importance of Ferrous Based Shape Memory Alloys
한국재료학회지
2018 .01
-
냉간 인발에 의해 예압된 NiTi SMA 와이어의 기계적 특성에 관한 연구
한국강구조학회 학술대회 발표집
2020 .06
-
Improving the seismic behavior of diagonal braces by developing a new combined slit damper and shape memory alloys
Structural Engineering and Mechanics, An Int＇l Journal
2022 .04
-
Temperature effect on seismic behavior of transmission tower-line system equipped with SMA-TMD
Smart Structures and Systems, An International Journal
2019 .01
-
Microstructures and Mechanical Properties of Equiatomic NiTi Shape Memory Alloy Undergoing Local Canning Compression and Subsequent Annealing
Metals and Materials International
2021 .12
-
Incremental dynamic analyses of concrete buildings reinforced with shape memory alloy
Steel and Composite Structures, An International Journal
2017 .01
-
변태온도가 다른 SMA wire로 제작된 SMA spring간의 수축운동 특성 비교
한국소음진동공학회 학술대회논문집
2016 .04
-
초탄성 형상기억합금을 이용한 원상 복원 X형 철골 가새 골조
한국공간구조학회지
2018 .01
-
SMA 와이어 하이브리드 구동 액츄에이터
한국정밀공학회 학술발표대회 논문집
2017 .05
-
A ductile steel damper-brace for low-damage framed structures
Steel and Composite Structures, An International Journal
2022 .08
-
SMA 작동기의 저항기반제어를 위한 기초연구
항공우주시스템공학회 학술행사 논문집
2017 .04
-
Performance based design optimum of CBFs using bee colony algorithm
Steel and Composite Structures, An International Journal
2018 .01
-
Mechanical Properties of Cold Drawn NiTi SMA Wire
한국콘크리트학회 학술대회 논문집
2020 .11
-
SMA 와이어를 이용한 역V형 철골 가새 골조의 이력거동
한국강구조학회 학술대회 발표집
2018 .05
이 논문의 저자 정보
최근 본 자료
댓글(0)
0