메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이준호 (서울과학기술대학교) 김형준 (서울과학기술대학교) 안지환 (서울과학기술대학교) 안효석 (서울과학기술대학교)
저널정보
Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.39 No.3
발행연도
2022.3
수록면
217 - 224 (8page)
DOI
10.7736/JKSPE.021.125

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Interest in the use of thin film of Ruthenium-Samaria doped ceria cermet (Ru-SDC) as anode in solid oxide fuel cells is increasing due to its high oxygen storage capacity and high chemical and thermal stability. To have enough structural integrity between sputtered Ru-SDC films and underlying substrates, good adhesion property is required. In this work, scratch resistance and failure mode for Ru-SDC films with various SDC composition were investigated using a scratch test method employing linearly increasing load from 1 to 50 N using a 200 μm radius Rockwell C indenter. Scratched surfaces were examined with a field emission scanning electron microscope. Chemical compositions in scratch tracks were analyzed by energy dispersive X-Ray spectroscopy. Critical loads for films with different SDC ratios were assessed and associated failure modes were identified. The highest scratch resistance among tested film compositions was the one that contained 50% of SDC. Failure modes of tested films regardless of the ratio of SDC were identified to be the initiation of tensile cracks with rapid increase of friction coefficient followed by chipping, and eventually the generation of a severe crack network.

목차

1. 서론
2. 연구 방법 및 내용
3. 시험 및 고찰
4. 결론
REFERENCES

참고문헌 (20)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0