지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2020.1
- 수록면
- 1,861 - 1,871 (11page)
이용수
초록· 키워드
오류제보하기
The influence of process parameters on geometry and the quality of amorphous ribbons produced by the Chill Block MeltSpinning (CBMS) method from, Fe82B18,Fe79.7V2.3B18,Fe77.5V4.5B18and (Co,Ni,Fe)73(B,Si)27 (in at%) alloys was studiedexperimentally and theoretically. The assessment of the forces, acting in the melt-substrate contact zone, showed that atCBMS the puddle is shaped by a hydrodynamic mechanism. Thus, by implementing the ideas of the dimensional analysisand solving the equations of heat and momentum transfer, it was possible to obtain a general functional dependency betweenthe process parameters and the geometry of the final product at CBMS (amorphous, or microcrystalline, ribbon). A methodfor the evaluation from the experimental data of the inherent to the dimensional analysis unknown parameters was developedand tested. The functional dependency was used: (1) to predict the ribbon geometry as a function of the process parameters;(2) to evaluate the cooling rates achieved during the processing of the amorphous ribbons.
목차
등록된 정보가 없습니다.
참고문헌 (39)
참고문헌 신청
H. Hillmann / 1978 / Proceedings of 3rd International Conference on Rapidly Quenched Metals :22
J. Vincent / 1980 / Proceedings of Conference on Solid Technology in Foundry and Casthouse :153
H. H. Liebermann / 1980 / Mater. Scl. Eng 43:203
J. Vincent / 1981 / Proceedings of 4th International Conference on Rapidly Quenched Metals :77
J. Vincent / 1981 / Continuous Casting of Small Cross Sections / TMS-AIME :103
J. Vincent / 1980 / Proceedings of Conference on Solid Technology in Foundry and Casthouse :153
H. H. Liebermann / 1980 / Mater. Scl. Eng 43:203
J. Vincent / 1981 / Proceedings of 4th International Conference on Rapidly Quenched Metals :77
J. Vincent / 1981 / Continuous Casting of Small Cross Sections / TMS-AIME :103
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
(Fe<sub>79</sub>C<sub>11</sub>B<sub>8</sub>Si<sub>2</sub>)<sub>100-X</sub>Cr<sub>X</sub> (X = 0-8) 조성 비정질 리본의 크롬 함량에 따른 비정질 형성능, 기계적 특성 평가
한국주조공학회지 (주조)
2016 .01
-
Enhancement of Thermal Stability and Bending Ductility of Fe?Si?B Amorphous Ribbons with Minor Y Addition
Metals and Materials International
2021 .10
-
W<sub>35</sub>Fe<sub>43</sub>C<sub>22</sub> 비정질 합금분말의 결정화 거동
열처리공학회지
2018 .01
-
Melt-spun Amorphous Super Engineering Plastic Fiber for Artificial Hair
한국고분자학회 학술대회 연구논문 초록집
2019 .10
-
Mechanical Properties and Thermal Neutron Shielding Efficiency of High B Amorphous Ribbons in the Fe-B-Mo-Cr System
Metals and Materials International
2016 .01
-
Fabrication and In Vitro Biocompatibility Evaluation of Zr48Cu36Al9Ag7 Amorphous Alloy Scalpel
Metals and Materials International
2024 .07
-
Elastic Energy Fraction as the Phenomenological Connection Between Electrical, Mechanical and Thermal Properties of the Al–(Nb, Mo, Ta, W) Amorphous Thin Films
Metals and Materials International
2019 .01
-
Effects of Metalloid Elements on the Mechanical Properties of Fe-Based Bulk Amorphous Alloys
한국재료학회지
2016 .01
-
The effect of clamping stress on the magnetic properties and vibration of amorphous alloy core
대한전기학회 학술대회 논문집
2019 .10
-
Zr-base amorphous alloys Correlation between grain size and mechanical, Electrochemical property
한국표면공학회 학술발표회 초록집
2019 .05
-
The Molecular Dynamics Study of Rapid Quenching Fabrication of Amorphous Silicon
대한기계학회 춘추학술대회
2017 .05
-
Sputtered Amorphous Alloy Electrode for Inverted Organic Solar Cells
한국고분자학회 학술대회 연구논문 초록집
2019 .10
-
Al-based Amorphous Metal Alloy Electrode for Prolonged Stability for Organic Solar Cells
한국고분자학회 학술대회 연구논문 초록집
2022 .04
-
열분해 온도와 성형압력의 영향에 따른 비정질 탄화규소 블록의 치밀화
한국결정성장학회지
2020 .01
-
Low Reverse Saturation Current Density of Amorphous Silicon Solar Cell Due to Reduced Thickness of Active Layer
Journal of Electrical Engineering & Technology
2016 .07
-
GZO 박막에 대한 비정질 구조에 따른 산소공공과 전하농도의 연관성에 대한 연구
반도체디스플레이기술학회지
2015 .01
-
스트레처블 배선용 저저항 알루미늄-몰리브데늄 합금에 대한 연구
한국표면공학회지
2023 .04
-
Aluminum Based Amorphous Alloy Electrode with Excellent Oxidation Resistance and Super Elastic Properties
한국고분자학회 학술대회 연구논문 초록집
2019 .10
-
RC deep beams with unconventional geometries: Experimental and numerical analyses
Computers and Concrete, An International Journal
2020 .01
-
Effect of Ni Addition on the Morphology and Microstructure of Both Conventional Cast and Melt-Spun of Al–Si–Fe–Nb (at wt%) Alloy
Metals and Materials International
2019 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0