메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Pradeep Singh (CSIRAMPRI) Vikas Shrivastava (CSIRAMPRI) I. B. Singh (CSIR- Advanced Materials and Processes Research Institute) D. P. Mondal (CSIRAMPRI)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.28 No.6
발행연도
2022.6
수록면
1,455 - 1,470 (16page)
DOI
10.1007/s12540-021-01033-3

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Three group of porous Ti4Al4Co samples made of (i) unmilled powder and vacuum sintered (S1), (ii) milled powder andvacuum sintered (S2), and (iii) milled powder sintered in open atmosphere (S3) were prepared. Phase change, crystallite sizeand lattice strain variations due to powder milling and sintering were examined by SEM and XRD. To evaluate mechanicalproperty, alloy samples were subjected to the uniaxial compression test. For corrosion analysis, Tafel plot was plotted usingelectrochemical corrosion system in simulated body fluid (SBF) as electrolytic medium. From the obtained results, it wasfound that significant microstructural transformation takes place due to milling and change in sintering atmosphere. SampleS1possessed 139 MPa compressive strength, which was about 48% and 76% higher than samples S2and S3respectively. Corrosion current density for S3was found as 5.5 ± 0.3 μA/cm2 which is 7 and 12 times lower than S2and S1samples.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0