메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
정세윤 (아주대학교) 김시혁 (아주대학교) 이기근 (아주대학교)
저널정보
대한전기학회 전기학회논문지 전기학회논문지 제70권 제5호
발행연도
2021.5
수록면
776 - 783 (8page)
DOI
10.5370/KIEE.2021.70.5.776

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
When a pipeline is inserted into the joint coupler, frequent fires and uneven fusion occur in a trial of fusion without reaching to a desired position. To solve the matters, a positioning sensor and sensor system were developed that provide the information of electrical signal to PC whether the cut surface of the pipeline has reached the correct position. The developed sensor system consists of two permanent magnetic tapes, two magnetic hall sensors, and a PC. As the magnetic tape and sensor were aligned in the center to center, a large magnetic strength was observed from the sensor. A large change in sensor signal was also observed as the aligned center was laterally misplaced. By comparing the values of the two sensors, a vertical alignment status of the pipeline was affirmed which provides whether the pipeline was located in the center inside the cylindrical joint coupler. Overall system performances were evaluated in terms of the length, width, thickness of the magnetic tape, and ambient temperature change. The output signal of the sensor was finally analyzed as an electric signal instead of magnetic strength that was transmitted to PC to determine whether the fusion process should begin.

목차

Abstract
1. 서론
2. 최적 설계 및 COMSOL 시뮬레이션
3. 제작 및 측정 셋업
4. 결과
5. 결론
References

참고문헌 (18)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2021-560-001688407