메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김동우 (부산대학교) 강동국 (부산대학교) 이수환 (부산대학교) 강성희 (LG 전자) 염은섭 (부산대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2020년 학술대회
발행연도
2020.12
수록면
832 - 836 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
During operation of the freezer, outdoor air can flow into the freezer through the drain tube. The moisture contained in the incoming air causes freezing around the evaporator. Since the freezing can reduce the performance of the evaporator, thus ice around the evaporator should be removed during the defrost process. Water from melting ice is discharged through the drain tube. In hot and humid conditions, freezing caused by the incoming air occurs at the drain hole (inlet of the drain tube). The flow path of the drain can be blocked due to growth of freezing. This problem should be solved to enhance the reliability of the product, because blocked flow path can affect the opening of the freezer door. In this study, the drain tube connected to the freezer was designed to prevent freezing of the freezer drain. The newly designed tube with shutter, which increases hydraulic resistance, was investigated in terms of actual fabrication possibilities through CFD simulation. By using 3D-printed tubes, the performance of models with different shutters was tested in test section mimicking the operating environment of the freezer. From the results, the drain tubes with the shutter can reduce incoming air and the suction pressure inside the freezer, caused by the door opening and closing, can be released increase of incoming air through the opening of the shutter.

목차

Abstract
1. 서론
2. 이론 및 실험
3. 실험결과 및 토의
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0