메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Dong Ho Nguyen (Incheon National Univ.) Koung Moon Kim (Incheon National Univ.) Gyu Hyeon Shim (Incheon National Univ.) Ho Seon Ahn (Thang University Engineering)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2020년 학술대회
발행연도
2020.12
수록면
532 - 536 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this research, electrochemical etching method was applied on plate heat exchanger surface to improve thermal-hydraulic performance. The enhancement was analyzed through experimental data regarding the overall heat transfer coefficient (OHTC), friction factor and performance of evaluation criterion (PEC) of water flow inside a plate heat exchanger (PHE). A series of etching cases was conducted in order to find the optimal conditions for an application on commercial stainless steel 304 corrugated plates with a symmetrical chevron angle of 30<SUP>0</SUP>. The etching experiment using aqua Regia solution of the volumetric ratio of 1:3:175 (HNO₃: HCl: H₂O, respectively), was conducted on the as-received surface resulting in a significant increase in Ra value and static contact angle. As a consequence of PHE experiments, the OHTC improved to 11-17%, and PEC valued from 1.08 to 1.19, while an unavoidable increase of friction factor by at least 20%.

목차

Abstract
1. Introduction
2. Experiment setup, Data Reduction and System Validation
3. Results and Discussion
4. Conclusion
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0