지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
The aim of this paper is to consider the effect of the manufacturing processes on corrosion and centerline cracking of ancient bronze spoons. The ancient bronze spoons in question were made by several steps of forging, in reheated condition with cast ingots. The manufacturing method is similar to that of the modern spoons. The investigations include observations from light and scanning electron microscopes of the microstructure in terms of the crack propagation. Cracks in the centerline are caused by solute segregation in the center-line region; this solute is solidified in the final stage of bronze spoon manufacture. Centerline cracking is also caused by ${\alpha}$ phase segregation, accompanied by forged overlapping along the longitudinal direction of the spoons. A vertical stripe with cracks along the centerline of the spoon's width is formed by folding in the wrought process. The overlapping area causes crack propagation with severe corrosion on the spoon surfaces over a period of a thousand years. The failure mechanisms of ancient bronze spoons may be similar to that of modern spoons, and the estimation of the failure mechanisms of ancient spoons can be appropriate to determine failure causes for such modern spoons.
목차
등록된 정보가 없습니다.
참고문헌 (15)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
The investigation crack problem through numerical analysis
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Effect of Cracking on Corrosion of Steel in Concrete
International Journal of Concrete Structures and Materials
2018 .01
-
Simulation of crack initiation and propagation in three point bending test using PFC2D
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Direct shear testing of brittle material samples with non-persistent cracks
Geomechanics & engineering
2018 .01
-
Simulation of crack initiation and propagation in three point bending test using PFC2D
Structural engineering and mechanics : An international journal
2018 .01
-
역학적 파동을 이용한 콘크리트 내부 수직균열 탐사 시스템
대한건축학회 학술발표대회 논문집
2022 .10
-
Crack analysis of reinforced concrete members with and without crack queuing algorithm
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
The investigation crack problem through numerical analysis
Structural engineering and mechanics : An international journal
2016 .01
-
Comparative study on cracked beam with different types of cracks carrying moving mass
Structural engineering and mechanics : An international journal
2015 .01
-
Numerical simulation on the crack initiation and propagation of coal with combined defects
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
Experimental and Numerical Investigations on Crack Intersection and Propagation of Concrete Structures
International Journal of Concrete Structures and Materials
2023 .03
-
장기간 현장조사를 통한 연속철근 콘크리트 포장의 균열간격과 균열폭 특성 분석
한국도로학회논문집
2016 .01
-
연속철근 콘크리트 슬래브 시스템의 균열진전 깊이와 균열폭 거동 관계 분석
한국도로학회논문집
2015 .01
-
Evaluating the Effect of Specimen Thickness on Fatigue Crack Growth in AZ31 Alloy Using ANOVA
한국기계가공학회지
2020 .06
-
복합균열 배관의 평가를 위한 등가 배관 선정
대한기계학회 춘추학술대회
2015 .11
-
건물 안전 진단을 위한 딥러닝 기반의 외벽 균열 검출 방법
대한설비관리학회지
2021 .12
-
Estimation and Measurement of Centerline Temperature of the Glass Waste Form
한국방사성폐기물학회 학술대회
2018 .01
-
Experimental study on propagation behavior of three-dimensional cracks influenced by intermediate principal stress
Geomechanics & engineering
2018 .01
-
굽힘 모멘트가 작용하는 두개의 층으로 구성된 용접배관 균열의 J-적분 및 균열열림변위 계산
대한기계학회 춘추학술대회
2018 .12
-
전자식 균열 측정 기기를 이용한 빅데이터 기반 균열 분석
대한건축학회 학술발표대회 논문집
2024 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0