지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2018.1
- 수록면
- 195 - 202 (8page)
이용수
초록· 키워드
오류제보하기
Many laboratory experiments on crack propagation under uniaxial loading and biaxial loading have been conducted in the past using transparent materials such as resin, polymethyl methacrylate (PMMA), etc. However, propagation behaviors of three-dimensional (3D) cracks in rock or rock-like materials under tri-axial loading are often considerably different. In this study, a series of true tri-axial loading tests on the rock-like material with two semi-ellipse pre-existing cracks were performed in laboratory to investigate the acoustic emission (AE) characteristics and propagation characteristics of 3D crack groups influenced by intermediate principal stress. Compared with previous experiments under uniaxial loading and biaxial loading, the tests under true tri-axial loading showed that shear cracks, anti-wing cracks and secondary cracks were the main failure mechanisms, and the initiation and propagation of tensile cracks were limited. Shear cracks propagated in the direction parallel to pre-existing crack plane. With the increase of intermediate principal stress, the critical stress of crack initiation increased gradually, and secondary shear cracks may no longer coalesce in the rock bridge. Crack aperture decreased with the increase of intermediate principal stress, and the failure is dominated by shear fracturing. There are two stages of fracture development: stable propagation stage and unstable failure stage. The AE events occurred in a zone parallel to pre-existing crack plane, and the AE zone increased gradually with the increase of intermediate principal stress, eventually forming obvious shear rupture planes. This shows that shear cracks initiated and propagated in the pre-existing crack direction, forming a shear rupture plane inside the specimens. The paths of fracturing inside the specimens were observed using the Computerized Tomography (CT) scanning and reconstruction.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Simulation of crack initiation and propagation in three point bending test using PFC2D
Structural engineering and mechanics : An international journal
2018 .01
-
Simulation of crack initiation and propagation in three point bending test using PFC2D
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Direct shear testing of brittle material samples with non-persistent cracks
Geomechanics & engineering
2018 .01
-
Crack initiation and fragmentation processes in pre-cracked rock-like materials
Geomechanics & engineering
2018 .01
-
The investigation crack problem through numerical analysis
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
The investigation crack problem through numerical analysis
Structural engineering and mechanics : An international journal
2016 .01
-
Experimental and Numerical Investigations on Crack Intersection and Propagation of Concrete Structures
International Journal of Concrete Structures and Materials
2023 .03
-
Crack analysis of reinforced concrete members with and without crack queuing algorithm
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
역학적 파동을 이용한 콘크리트 내부 수직균열 탐사 시스템
대한건축학회 학술발표대회 논문집
2022 .10
-
The effect of ball size on the hollow center cracked disc (HCCD) in Brazilian test
Computers and Concrete, An International Journal
2018 .01
-
Fatigue Crack-Tip Stress Mapping Using Neutron Diffraction
한국재료학회지
2015 .01
-
Numerical simulation on the crack initiation and propagation of coal with combined defects
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
구조용강 인장시험편 내의 크랙 성장에 대한 해석 및 검증
한국기계기술학회지
2015 .01
-
Comparative study on cracked beam with different types of cracks carrying moving mass
Structural engineering and mechanics : An international journal
2015 .01
-
Effect of Cracking on Corrosion of Steel in Concrete
International Journal of Concrete Structures and Materials
2018 .01
-
Crack behaviour of top layer in layered rocks
Geomechanics & engineering
2018 .01
-
Parametric Study on Fracture Behaviors of Non-aligned Twin Cracked Pipe Under Bending
대한기계학회 춘추학술대회
2018 .12
-
복합균열 배관의 평가를 위한 등가 배관 선정
대한기계학회 춘추학술대회
2015 .11
-
Evaluating the Effect of Specimen Thickness on Fatigue Crack Growth in AZ31 Alloy Using ANOVA
한국기계가공학회지
2020 .06
-
Evaluation of Crack Propagation and Post-cracking Hinge-type Behavior in the Flexural Response of Steel Fiber Reinforced Concrete
International Journal of Concrete Structures and Materials
2017 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0