메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
허유 (경희대학교 섬유공학과) 이상택 ([주]동일방) 류운영 (경희대학교 섬유공학과) 우제린 (경희대학교 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제31권 제2호
발행연도
1994.1
수록면
111 - 118 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Weaving is the technology to form 2-dimensional structures. where weft yarn is inserted orthogonal into the opened sheets of warp yarn groups. The weft insertion is realized in various methods. The modern technology to insert weft yarns doesn't use the shuttle. The shuttle looms represent high performance and produce good quality fabric. However the new technology has induced some problems which were not so serious in the past: first of all the fault of the stop mark which occurs as a result of the intermittent operations of weaving machines. This type of fault is occupying at present the most of the faults in fabrics manufactured by shuttle looms. In this study it was dealt with how the stop mark occurred and how the starting up conditions could affect the quality of the woven fabrics. The experimental research revealed that 1) the weft density variation at the moment of machine stop resulted to stop nark ranged 1 or 2 picks. 2) during the machine starting up the most of the stop mark took place ranging 2∼3 picks, 3) the irregularity of the weft density during the machine start up resulted from the velocity overshoot in the acceleration period, and 4) the starting up position of the reed between 0 to 180 degrees in the weaving cycle had the effect to reduce the stop mark fault.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0