메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
허유 (경희대학교 기계.산업시스템 공학부) 전두환 (영남대학교 섬유패션학부) 김종성 (경희대학교 대학원 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제43권 제2호
발행연도
2006.1
수록면
86 - 94 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Modern weaving machines have the beat-up mechanism whose front position is predetermined mechanically. Therefore the relative position between the reed front and the clothfell plays an important role in producing the high quality fabrics with uniform weft density distribution. This research reports on the results from the simulation that was conducted on the basis of the theoretical model about the fabric weft density dynamics, including the factors such as beat-up motion and warp tension. Results showed that the weft density change was very sensitive to the initial clothfell position. The clothfell position was relocated toward the machine front during the machine restart and then it approached the steady state value. A low initial warp tension led to a narrow pickspace, too. Even though the warp tension and the beat-up force changed for a long period of time after the machine restarted, the weft interval variation and the clothfell position change were stabilized early, while the clothfell position showed an overshooting behavior for a low initial warp tension under a high level of process tension condition. Initial weft interval condition showed no influence on the dynamic behavior of the weft density.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0