메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
박노국 (영남대학교) 권병찬 강도형 (영남대학교) 윤대식 (창성엔지니어링) 류재홍 (고등기술연구원) 강석환 (고등기술연구원)
저널정보
한국에너지기후변화학회 에너지기후변화학회지 에너지기후변화학회지 Vol.15 No.1
발행연도
2020.6
수록면
81 - 91 (11page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, the catalytic combustion characteristics according to the type of volatile organic compounds (VOCs) emitted from the printing process were investigated. The combustion characteristics were analyzed with the exothermic behavior on the catalyst bed during low-temperature combustion ignition using catalysts for methyl ethyl ketone (MEK), ethyl acetate (EA), and methanol(MeOH) among VOCs used in the gravure printing process. As a result of comparing and analyzing the temperature change in the inlet, middle, and outlet portions of the honeycomb catalyst packed in the reactor for each initial ignition temperature, it was confirmed that EA, MEK and MeOH were ignited above 250 °C, 270 °C, and 200 °C, respectively. It was confirmed that the differentiation of ignition and operating temperature is required depending on the type of VOCs in the catalytic combustion process in order to prevents to acting as a precursor of ultra-fine dust after discharged to the atmosphere of the solvent used in the printing process. It was concluded the deactivation of the combustion catalysts may be caused by the formation of carbon by incomplete combustion when MEK and EA were ignited at low-temperature.

목차

ABSTRACT
1. 서론
2. 실험
3. 결과 및 고찰
4. 결론
References

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0