메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The manufacture of sodium sulfide through a carbon reduction process, using sodium sulfate as raw material, generatessodium sulfide by-product sediment, which has potential health and environmental impacts. Herein, a novel strategy isproposed to recover sodium oxide from the sediment by using acidic treatment and the influence of solution pH on sodiumoxide content is systematically studied. The results reveal that the sodium oxide content decreases with decreasing pH valueof the solution. At pH = 4, the as-treated sediment results in Na2O content of 3.10 wt. %, which recovery rate is about 90%. Furthermore, the influences of sintering temperature and time on compressive strength and bulk density are studied. Ingeneral, the compressive strength and bulk density increase with increasing sintering temperature and time. After sinteringat 1,300 oC for 120 min, the compressive strength and bulk density of the sintered porous ceramic are 26.66 MPa and 1.31 g/cm3, respectively. The porous ceramic, sintered at 1,300 oC, mainly consists of hauyne, gehlenite and hematite phases. Insummary, the few flaws in cell-walls result in high compressive strength of the as-prepared porous ceramics.

목차

등록된 정보가 없습니다.

참고문헌 (13)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0