지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제23권 제6호
- 발행연도
- 2022.12
- 수록면
- 845 - 852 (8page)
이용수
초록· 키워드
오류제보하기
In this study, industrial waste tailings were used as the main raw material to prepare porous ceramic by injection molding.
The porous ceramic samples were surface treated by γ-Aminopropyl triethoxysilane solution to be used as adsorbent to removeCu(II) from solution. The effects of sintering technology on properties of porous ceramic samples were studied. Meanwhile,the effects of test conditions on the adsorption characteristics of samples were also studied. The samples were analyzed by X ray diffraction, FTIR, and SEM. Atomic absorption spectrophotometer was used to determine the changes of Cu(II)concentration in the aqueous solution before and after adsorption. The results show that the compressive strength of thesamples is increased with the increase of sintered temperature and extension of holding time. The average pore diameters ofthe samples are decreased and concentrated between 0.1 and 0.2mm with the increase of sintered temperature. The removalrates and the adsorption capacities of the samples to Cu(Ⅱ) are increased with the increase of solution temperature, increaseof pH value of the solution and the extension of the test time.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Characteristics of porous B4C ceramic fabricated by the microwave sintering technique
Journal of Ceramic Processing Research
2021 .01
-
Acidic treatment of sodium sulfide by-product sediment to recover sodium oxide and preparation porous ceramics for building applications
Journal of Ceramic Processing Research
2020 .01
-
Microstructure and mechanical properties of yttrium aluminum garnet porous ceramics prepared by different sintering process parameters
Journal of Ceramic Processing Research
2019 .01
-
The effect of the sintering temperature on the properties of porous YAG ceramics
Journal of Ceramic Processing Research
2018 .02
-
Application of porous ceramic decorative plate materials in industrial design
Journal of Ceramic Processing Research
2023 .06
-
Effect of sintering temperature and ccalcium oxide content on microstructure and properties of geopolymer porous ceramics
Journal of Ceramic Processing Research
2024 .02
-
Conversion of coconut waste into cost effective adsorbent for Cu(II) and Ni(II) removal from aqueous solutions
Environmental Engineering Research
2021 .08
-
Improved temperature stability of Ba0.5Sr0.5TiO3/ZnAl2O4 ceramics by controlling microstructure with sintering behavior
Journal of Ceramic Processing Research
2023 .04
-
The effect of ceramic fiber on the rheological and mechanical properties of porous Al2O3 ceramics
Journal of Ceramic Processing Research
2023 .02
-
CO₂ adsorption and separation using metal-organic porous materials
한국에너지학회 학술발표회
2016 .04
-
Adsorption and separation behaviors of Y(III) and Sr(II) in acid solution by a porous silica based adsorbent
Nuclear Engineering and Technology
2021 .10
-
Microstructure and Varistor Properties of ZVMND Ceramics with Sintering Temperature
Transactions on Electrical and Electronic Materials
2015 .01
-
Preparation of Polyethersulfone/Poly(2-(dimethylamino) ethyl methacrylate) Electrospun Nanofiber for Cu2+ Adsorption
한국고분자학회 학술대회 연구논문 초록집
2019 .04
-
The Effect of TiO2 Addition on Low-temperature Sintering Behaviors in a SnO2-CoO-CuO System
한국분말야금학회지
2024 .04
-
컬럼반응조 내 충진된 다공성 zeolite-slag 세라믹에 의한 산성광산배수의 처리특성
한국수처리학회지
2018 .01
-
Adsorption of Krypton on Porous Carbon at Low Temperature
한국방사성폐기물학회 학술대회
2019 .01
-
고전력 반도체 모듈 적용을 위한 마이크로 입자 구리 소결 접합부의 미세조직 및 기계적 강도에 미치는 소결 접합 조건의 영향
대한용접·접합학회지
2019 .04
-
Study of the Adsorption Possibility of SOx and NOx Using Porous Diatomite Ceramic
동력시스템공학회지
2021 .02
-
Low temperature sintering of Al2O3 according to the amount of Bi2O3 additive considering economics
Journal of Ceramic Processing Research
2020 .01
-
Sampling Zero란 무엇인가?
제어로봇시스템학회지
2019 .03
이 논문의 저자 정보
최근 본 자료
댓글(0)
0