메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Zhi Tong (Xi’an Polytechnic University) Miaoyu Li (Xi’an Polytechnic University) Dachuan Lib (Shaanxi Modern Architectural Design and Research Institute) Kui Wu (Shaanxi Modern Architectural Design and Research Institute) Xiaoyu Yang (Xi’an Polytechnic University)
저널정보
한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제24권 제2호
발행연도
2023.4
수록면
308 - 320 (13page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Porous mullite ceramic membrane supports were prepared by fly ash as the main raw material, with addition of loess andbauxite in the ratio of silicon to aluminium in the mullite phase (3Al2O3-2SiO2), calcium carbonate as pore-forming agents andpolyvinyl alcohol as the binder. The effects of calcium carbonate addition (0, 5, 10, and 15 wt%) and sintering temperatureon the performance of prepared supports, including crystalline phase evolution, microstructure, porosity, flexural strength,and pure water flux, were investigated. The results shows that the increase in sintering temperature is beneficial to theformation of the mullite crystalline phase and improves flexural strength. When the sintering temperature reached 1200 °Cand the calcium carbonate content was 5%, the porosity of the support was 46.3% and the flexural strength was 77.7 MPa. Based on the experiments, central composite experiments and response surface analysis were carried out to optimise thepreparation conditions, and determine the optimum amount of calcium carbonate addition and sintering temperature. Theresults of the study are of reference value for the study of inorganic ceramic membrane support.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0