메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
이영균 (금오공과대학교) 양동화 (금오공과대학교) 김성동 (금오공과대학교)
저널정보
유공압건설기계학회 유공압건설기계학회 학술대회논문집 유공압건설기계학회 2020年度 春季 學術大會 論文集
발행연도
2020.7
수록면
80 - 85 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Two conventional ways are generally used to control the temperature of hydraulic oil: On-Off control and PID control. There is an critical disadvantage in PID control that an integral winding-up occurs when there is saturation limit in control action. Once the wind-up occurs, overshoot of an output comes to be very large. We have devised to combine On-Off control and PID control to solve the integrator wind-up in this study. Two methods are specifically considered in combining On-Off control and PID control. The first method is that the On-Off control works when error between output and target temperature is out of a PID zone, which is normally chosen to be small enough to avoid the integrator windup. The second anti-windup is a method in which On-Off control works initially when the target temperature is changed and the PID control and the oil cooler are activated for the first time when the error temperature comes crossover zero and becomes the same sign as the initial error sign. An experimental temperature control device was set up and a series of test were performed to verify the real performances of the suggested anti-windup controls. Test results showed that two suggested methods were found to be able to effectively solve the phenomenon of integral wind-up.

목차

Abstract
1. 서론
2. 기존 제어 이론
3. 실험 장치 및 결과
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-550-000878069