메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
손유라 (영남대학교) 양정훈 (영남대학교)
저널정보
한국건축친환경설비학회 건축환경설비 건축환경설비 제14권 제2호
발행연도
2020.4
수록면
195 - 207 (13page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The purpose of this study is to provide basic information such as static pressure loss and friction factor and P-Q curves of aluminum flexible ducts, which are mainly used in ventilation systems. The aluminum flexible duct is then applied to the horizontal tube. Through the experiment, the effects of diameter, compression ratio, pitch interval, duct internal wind velocity, and Reynolds number of aluminium flexible ducts are measured and reviewed using statistical methods. The maximum static pressure loss was 138 Pa in a 100 mm duct, 62 Pa in 125 mm and 30 Pa in 150 mm. In addition, similar static pressure losses occurred at 25% and 50% of the duct compression ratio. The friction factor occurred up to 0.5 at 75% compression at 1 m duct with a diameter of 100 mm. Eight prediction models were derived by stepwise regression. All prediction models had R² of 0.8 or higher, but a number of values in response to the actual test were found to exceed 20 percent of the error. For the Gaussian process regression, the prediction model 6 was also very responsive with the determinant R² 0.99 and the RMSE 2.603.

목차

ABSTRACT
서론
실험개요
실험결과
통계적 방법을 이용한 정압손실 예측
결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-546-000664990