메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
임성구 (Soongsil University) 김진오 (Soongsil University)
저널정보
한국소음진동공학회 한국소음진동공학회논문집 한국소음진동공학회논문집 제29권 제6호(통권 251호)
발행연도
2019.12
수록면
677 - 681 (5page)
DOI
10.5050/KSNVE.2019.29.6.677

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
This study deals with ultrasound reflection characteristics at a target surface during distance measurements using an ultrasonic sensor. The purpose of this study is to investigate the allowable range of the slope angle of a target surface where the incident ultrasound is reflected to return when the distance is measured by an ultrasonic sensor for both transmission and reception. To this end, it is necessary to research the reflection characteristics of ultrasound according to the roughness and slope angle of the target surface. We carried out experiments detecting ultrasonic waves reflected on a rough surface and returning to the sensor. The target specimens had particle sizes from 0 to 0.01 relative to the ultrasonic wavelength. As we changed the target surface slope, we monitored the reception of the reflected waves and investigated the distance measurement error. It appears that for the rougher surface, the allowable slope angle range was larger even though the detectable distance range is smaller. When the particle size relative to the ultrasonic wavelength was 0.008, the distance measurement was reasonable at a slope angle up to 25°.

목차

ABSTRACT
1. 서론
2. 거칠기에 따른 반사특성
3. 경사각에 따른 반사특성
4. 결론
References

참고문헌 (5)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-424-000125777