지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2018.1
- 수록면
- 225 - 233 (9page)
이용수
초록· 키워드
오류제보하기
One of engineered woods, glued laminated timber (GLT), can provide a constant level of performance and desired strength even if the quality of wood is low. Due to this fact, there is a growing interest in GLT using domestic species and related research has been carried out continuously. In addition, GLT is popularly being applied to the long-span or high-rise structures overseas. However, KBC 2016 does not allow the engineered woods to be used for middle and high-rise buildings by limiting height. Therefore, a proper design procedure and rationale should be clearly presented by the help of performance-based seismic design. With this background, the goal of this study is to establish a specific procedure for design of a 9-story building with RC shear walls and GLT frames according to the performance-based design of KBC 2016. The performance objectives were set according to KBC and the acceptance criteria for each goal were defined. The RC shear walls and GLT frames were designed by concrete and wood structure requirements, respectively. Analytical models were developed to reflect their nonlinear features, and both nonlinear static and dynamic analyses were conducted. Performance evaluation results showed that the shear walls have insufficient shear strength, so they were re-designed. Consequently, it has been confirmed that GLT frames can be applied to a 9-story office building with the assistance of RC shear walls and performance-based seismic design.
목차
등록된 정보가 없습니다.
참고문헌 (17)
참고문헌 신청
Korea Forest Service
Ministry of Agriculture, Food and Rural Affairs / 2002 / Development of Structural Design Method for Glulam Structures and Evaluation of Fire-resistance of Glulam :30~157
박학길 / 2003 / 간벌 소경재를 이용한 집성목재 보의 휨 거동특성에 관한 연구 / 대한건축학회논문집 구조계 19(6):11~17
Korea Forest Service / 2008 / Development of Element Technologies for Large-scaled Timber Construction
Pang SJ / 2015 / Development of Stochastic Model for Predicting the Bending Strength of Glued Laminated Timber / Proceeding of the Architectural Institute of Korea :109~110
Ministry of Agriculture, Food and Rural Affairs / 2002 / Development of Structural Design Method for Glulam Structures and Evaluation of Fire-resistance of Glulam :30~157
박학길 / 2003 / 간벌 소경재를 이용한 집성목재 보의 휨 거동특성에 관한 연구 / 대한건축학회논문집 구조계 19(6):11~17
Korea Forest Service / 2008 / Development of Element Technologies for Large-scaled Timber Construction
Pang SJ / 2015 / Development of Stochastic Model for Predicting the Bending Strength of Glued Laminated Timber / Proceeding of the Architectural Institute of Korea :109~110
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
친환경 건축을 위한 재료 분리형 GLT-steel 보 개발
대한건축학회 학술발표대회 논문집
2023 .04
-
전단파괴모드를 고려한 철근콘크리트 보통전단벽-골조 건물의 붕괴메커니즘
한국지진공학회 논문집
2021 .01
-
The significance of removing shear walls in existing low-rise RC frame buildings – Sustainable approach
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Seismic assessment of slender high rise buildings with different shear walls configurations
Advances in computational design
2016 .01
-
Seismic performance evaluation of mid-rise shear walls: experiments and analysis
Structural engineering and mechanics : An international journal
2016 .01
-
중층 종합병원 건물의 내진성능평가
한국지진공학회 논문집
2017 .01
-
비선형 동적해석을 이용한 소규모 필로티형 철근콘크리트 건축물의 내진성능평가
한국지진공학회 논문집
2016 .01
-
Seismic performance evaluation of mid-rise shear walls: experiments and analysis
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
기초 모델링이 전단벽이 있는 RC골조의 내진성능에 미치는 영향
한국콘크리트학회 학술대회 논문집
2022 .05
-
Stiffness Degradation Induced by Seismic Loading on a RC Shear Wall
한국구조물진단유지관리공학회 논문집
2022 .06
-
목재 전단벽으로 보강된 중목구조 골조의 내진성능평가
대한건축학회논문집
2024 .07
-
비선형 동적해석에 의해 내진설계된 철근콘크리트 보통전단벽의 지진취약도 분석
한국지진공학회 논문집
2019 .01
-
내진성능평가시 횡보강근이 없는 RC 보-기둥 접합부의 전단내력 평가
한국지진공학회 논문집
2019 .01
-
붕괴방지 수준을 고려한 국내 고층 아파트의 성능기반 내진설계
한국지진공학회 논문집
2016 .01
-
Reliability assessment of RC shear wall-frame buildings subjected to seismic loading
Computers and Concrete, An International Journal
2017 .01
-
The influence of different factors on buildings’ height in the absence of shear walls in low seismic regions
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Integrating of Nonlinear Shear Models into Fiber Element for Modeling Seismic Behavior of Reinforced Concrete Coupling Beams, Wall Piers, and Overall Coupled Wall Systems
International Journal of Concrete Structures and Materials
2019 .07
-
횡력저항요소에 따른 중고층 목구조물의 구조해석 및 설계
대한건축학회 학술발표대회 논문집
2024 .10
-
공학목재의 9층 사무소 건물 적용 가능성 연구
한국지진공학회 논문집
2017 .07
-
Resilient structures in the seismic retrofitting of RC frames: A case study
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0