지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Structural Engineering and Mechanics, An Int'l Journal Structural Engineering and Mechanics, An Int'l Journal Vol.76 No.1
- 발행연도
- 2020.1
- 수록면
- 83 - 99 (17page)
이용수
초록· 키워드
오류제보하기
Shear walls are structural members in buildings that are used extensively in reinforced concrete frame buildings, and almost exclusively in the UK, regardless of whether or not they are actually required. In recent years, the UK construction industry, led by the Concrete Centre, has questioned the need for such structural elements in low to mid-rise reinforced concrete frame buildings. In this context, a typical modern, 5-storey residential building is studied, and its existing shear walls are replaced with columns as used elsewhere in the building. The aim is to investigate the impact of several design variables, including concrete grade, column size, column shape and slab thickness, on the building’s structural performance, considering two punching shear limits (VEd/VRd,c), lateral drift and accelerations, to evaluate its maximum possible height under wind actions without the inclusion of shear walls. To facilitate this study, a numerical model has been developed using the ETABS software. The results demonstrate that the building examined does not require shear walls in the design and has no lateral displacement or acceleration issues. In fact, with further analysis, it is shown that a similar building could be constructed up to 13 and 16 storeys high for 2 and 2.5 punching shear ratios (VEd/VRd,c), respectively, with adequate serviceability and strength, without the need for shear walls, albeit with thicker columns.
목차
등록된 정보가 없습니다.
참고문헌 (47)
참고문헌 신청
Aalto, J. / 2017 / Comparison of punching shear design provisions for flat slabs
Alkarani / 2013 / Evaluation of punching shear in flat slabs / International Journal of Research in Engineering and Technology
Aly, A. / 2015 / On the design of high-rise buildings for multi-hazard : fundamental differences between wind and earthquake demand / Shock Vib 2015(1):1~22
Ambrose, J. / 1995 / Simplified Building Design for Wind And Earthquake Forces / Wiley
Avşar, Ö. / 2012 / Effective flexural rigidities for ordinary reinforced concrete columns and beams / Struct. Design Tall Special Build 23(6):463~482
Alkarani / 2013 / Evaluation of punching shear in flat slabs / International Journal of Research in Engineering and Technology
Aly, A. / 2015 / On the design of high-rise buildings for multi-hazard : fundamental differences between wind and earthquake demand / Shock Vib 2015(1):1~22
Ambrose, J. / 1995 / Simplified Building Design for Wind And Earthquake Forces / Wiley
Avşar, Ö. / 2012 / Effective flexural rigidities for ordinary reinforced concrete columns and beams / Struct. Design Tall Special Build 23(6):463~482
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
The significance of removing shear walls in existing low-rise RC frame buildings – Sustainable approach
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Seismic assessment of slender high rise buildings with different shear walls configurations
Advances in computational design
2016 .01
-
전단파괴모드를 고려한 철근콘크리트 보통전단벽-골조 건물의 붕괴메커니즘
한국지진공학회 논문집
2021 .01
-
섬유(Fiber)요소와 비선형 전단스프링을 적용한 고축력을 받는 철근콘크리트 전단벽의 비선형거동 분석
한국지진공학회 논문집
2015 .01
-
Condition assessment of fire affected reinforced concrete shear wall building - A case study
Advances in concrete construction
2016 .01
-
골조-전단벽 구조에서 수평강성의 향상을 위한 기둥과 전단벽 단면적의 배분
대한건축학회 논문집 - 구조계
2016 .07
-
Seismic behavior of RC building by considering a model for shear wall-floor slab connections
Computers and Concrete, An International Journal
2015 .01
-
섬유(Fiber) 요소와 비선형 전단스프링을 이용하여 바벨형 단면을 갖는 철근콘크리트 전단벽의 비선형 정적해석
대한건축학회 논문집 - 구조계
2015 .09
-
Seismic performance evaluation of mid-rise shear walls: experiments and analysis
Structural engineering and mechanics : An international journal
2016 .01
-
Structural Shear Wall Systems with Metal Energy Dissipation Mechanism
International journal of high-rise buildings
2016 .01
-
Seismic performance evaluation of mid-rise shear walls: experiments and analysis
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Prediction of shear strength and drift capacity of corroded reinforced concrete structural shear walls
Structural Engineering and Mechanics, An Int＇l Journal
2022 .07
-
Stiffness Degradation Induced by Seismic Loading on a RC Shear Wall
한국구조물진단유지관리공학회 논문집
2022 .06
-
Seismic analysis of shear wall buildings incorporating site specific ground response
Structural engineering and mechanics : An international journal
2016 .01
-
결함 상세를 포함하는 철근콘크리트 전단벽의 수치 모델에 관한 실험적 평가
한국지진공학회 논문집
2016 .01
-
Seismic behavior of RC framed shear wall buildings as per IS 1893 and IBC provisions
Geomechanics & engineering
2015 .01
-
Seismic analysis of shear wall buildings incorporating site specific ground response
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Seismic behavior of SFRC shear wall with CFST columns
Steel and Composite Structures, An International Journal
2018 .01
-
Seismic behavior of T-shaped steel reinforced high strength concrete short-limb shear walls under low cyclic reversed loading
Structural engineering and mechanics : An international journal
2016 .01
-
Reliability assessment of RC shear wall-frame buildings subjected to seismic loading
Computers and Concrete, An International Journal
2017 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0