메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
조수용 (경상대학교) 정양범 (BIP 기술연구소) 견광필 (BIP 기술연구소)
저널정보
한국동력기계공학회 동력시스템공학회지 한국동력기계공학회지 제22권 제5호
발행연도
2018.10
수록면
51 - 62 (12page)
DOI
10.9726/kspse.2018.22.5.051

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Axial force prediction is performed on a turbine used in the organic Rankine cycle for heat recovery wasted by operating fluid of R245fa. Axial force greatly affects lifespan of a thrust bearing and a turbine. In typical, a turbine has fast startup characteristics so that its axial force is evaluated only at the on-deign point. However, the turbine adopted in this study needs long time to reach the design point operation. This causes to occur large axial force at off-design points, which greatly affects the performance of the thrust bearing. Hence, these forces were investigated for various operating conditions including the influence by the configuration of two-stage radial turbine system. The predicted result showed that the axial force could be increased more than five-fold compared with its on-design point. Therefore, the turbine should be operated along the maximum output power curve depending on the evaporation temperature condition in order to avoid a larger axial force.

목차

Abstract
1. 서론
2. 추력예측의 방법
3. 시스템에서의 추력예측
4. 결론
References

참고문헌 (13)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0