지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2022.2
- 수록면
- 95 - 104 (10page)
- DOI
- 10.7316/KHNES.2022.33.1.95
이용수
초록· 키워드
오류제보하기
Micro hydropower is a readily available renewable energy source that can be harvested utilizing hydrokinetic turbines from shallow water canals, irrigation and industrial channel flows, and run-off river stream flows. These sources generally have low head (<1 m) and low velocity which makes it difficult to harvest energy using conventional turbines. A horizontal-axis screw turbine was designed and numerically tested to extract power from such low-head water sources. The 3-bladed screw-type turbine is placed horizontally erpendicular to the incoming flow, partially submerged in a narrow water channel at no-head condition. The turbine hydraulic performances were studied using Computational Fluid Dynamics models. Turbine design parameters such as the shroud diameter, the hub-to-shroud ratios, and the submerged depths were obtained through a steady-state parametric study. The resulting turbine configuration was then tested by solving the unsteady multiphase free-surface equations mimicking an actual open channel flow scenario. The turbine performance in the shallow channel were studied for various Tip Speed Ratios (TSR). The highest power coefficient was obtained at a TSR of 0.3. The turbine was then scaled-up to test its performance on a real site condition at a head of 0.3 m. The highest power coefficient obtained was 0.18. Several losses were observed in the 3-bladed turbine design and to minimize losses, the number of blades were increased to five. The power coefficient improved by 236% for a 5-bladed screw turbine. The fluid losses were minimized by increasing the blade surface area submerged in water. The turbine performance was increased by 74.4% after dipping the turbine to a bottom wall clearance of 30 cm from 60 cm. The final output of the novel horizontal-axis screw turbine showed a 2.83 kW power output at a power coefficient of 0.63. The turbine is expected to produce 18,744 kWh/year of electricity. The design feasibility test of the turbine showed promising results to harvest energy from small hydropower sources.
목차
Abstract
1. Introduction
2. Description of the model
3. Numerical methods
4. Parametric study
5. Prototype turbine design for the real site operating condition
6. Conclusion
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
전산유체역학을 이용한 초저낙차 상황에서의 도립형 횡류수차의 해석 및 설계 최적화
한국기계가공학회지
2019 .04
-
가스터빈 기동 정지 시 1 단 블레이드 열변형 예측
대한기계학회 춘추학술대회
2016 .07
-
Numerical investigation of a tidal stream turbine using two methods of the Multiple Reference Frame and the Actuator Disk Momentum
Journal of Advanced Marine Engineering and Technology (JAMET)
2021 .10
-
Numerical Analysis of the Performance of Cross Flow Turbine by the Shapes of Runner Blade
한국유체기계학회 학술대회 논문집
2015 .06
-
마이크로 가스터빈 내의 열유동해석
한국기계기술학회지
2015 .01
-
송수관로형 헬리켈 마이크로 수차 개발에 관한 연구
한국기계기술학회지
2016 .01
-
Effect of Impulse Turbine Geometry on the Performance of a Dual-Turbine System for Wave Energy Conversion
International Journal of Fluid Machinery and Systems
2018 .03
-
방출 수 에너지 하베스팅을 위한 수차 설계에 관한 연구
전기전자재료학회논문지
2021 .01
-
7 MW급 증기터빈 기본형상설계 기법에 대한 연구
동력시스템공학회지
2019 .04
-
Study on Through-flow Model for Turbine System Considering Three-dimensional Flow Field Distortion Effect
International Journal of Fluid Machinery and Systems
2018 .12
-
Design and performance evaluation of a 10W pico-hydro portable turbine using computational analysis
Journal of Advanced Marine Engineering and Technology (JAMET)
2018 .10
-
Numerical Investigation of Horizontal-Axis Screw Turbine Designs to Extract Power from Low-Head Sources
한국신·재생에너지학회 학술대회 초록집
2022 .04
-
Design Feasibility Study of a Horizontal Savonius Hydrokinetic Turbine in an Open Channel
AFORE
2021 .10
-
마이크로 수력 발전을 위한 프로펠러형 림구동 축류 터빈 설계
대한조선학회 논문집
2022 .06
-
Numerical simulation and Experimental analysis for the Performance of Cross Flow Hydro Turbine
한국유체기계학회 학술대회 논문집
2015 .12
-
Performance Study of Cross Flow Hydro Turbine through Numerical simulation and Experimental analysis
한국신·재생에너지학회 학술대회 초록집
2015 .11
-
Design and Parametric Study of a Low-Head Inclined Axial Turbine Concept Using Computational Fluid Dynamics
AFORE
2022 .09
-
전산유체역학 해석에 기반한 20㎾급 도립형 횡류수차의 제작 및 성능 실증
한국기계가공학회지
2021 .02
-
소수력 발전용 수차설치를 위한 관로 형상 최적화에 대한 연구
한국기계기술학회지
2020 .01
-
Performance Characteristics and Flow Field of Axial Flow Hydraulic Turbine in Shallow Open Channel
International Journal of Fluid Machinery and Systems
2018 .12
이 논문의 저자 정보
이 논문과 함께 이용한 논문
Numerical Study on Micro-Hydro Vortex Power Plant as a Solution to Capture the Waste Energy
Dylan S. Edi
,
isinghe
,
Ho-Seong Yang
외 5명
AFORE
2021
.10
Effects of blade number and draft tube in gravitational water vortex power plant determined using computational fluid dynamics simulations
Min-Sung Kim
,
Dylan S. Edi
,
isinghe
외 4명
Journal of Advanced Marine Engineering and Technology (JAMET)
2021
.10
Ballast Pump Design Consideration for Quick Descend of Scientific Submarine in Deep Sea
M. A. T
,
imzi
,
Y. B. Ham
외 9명
유공압건설기계학회 학술대회논문집
2019
.06
Selection of Optimal Number of Francis Runner Blades for a Sediment Laden Micro Hydropower Plant in Nepal
Baida
,
Binaya
,
Chit
외 9명
International Journal of Fluid Machinery and Systems
2015
.12
Flow Analysis in Positive Displacement Micro-Hydro Turbine and Development of Low Pulsation Turbine
Ku
,
okawa
,
Junichi
외 4명
International Journal of Fluid Machinery and Systems
2008
.08
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2022-550-001096581