메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Prasit Phoosomma (Dhonburi Rajabhat University)
저널정보
제어로봇시스템학회 제어로봇시스템학회 국제학술대회 논문집 ICCAS 2018
발행연도
2018.10
수록면
1,414 - 1,417 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The objectives of research are prototyping renewable energy from solar dryers can be used by a nipa palm, and comparing the performance and efficiency of solar energy. In order to use a niba palm drying and analyze the breakeven by electrical power for the nipa palm use the power replacement type of solar energy. An experiment, the effects of solar drying cabinet, there are three drying temperatures control settings at 50℃, 60℃, and 70℃. The drying time of 6 hours. By choosing niba palm as the raw material for the experiment. The results show that the average solar energy intensity was 750.58 W/m². Initial moisture content of 39.65% dry basis and the final moisture content of 17.04% dry basis. The humidity decreases with time and temperature raise. Drying the nipa palm with solar dryer was very well dried and clearly, when set up the controlling temperature higher than 50℃. Also, set up the controlling temperature at 60℃ that the temperature inside the fumigator averaged at 57.52℃. The drying time of 6 hours per day, when consider a solar dryer, it would be costed more than two units. Considering the electricity consumption between solar drying and conventional electric dryers. The breakeven point is 371 days.

목차

Abstract
1. INTRODUCTION
2. RESEARCH METHODOLOGY
3. EXPERIMENTAL RESULT
4. CONCLUSION
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-003-003540069