메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Several series of experiments were conducted to find copper removal from artificial suspension by using micellar enhanced ultrafiltration (MEUF) with sodium Dodecyl Sulphate (SDS) as a surfactant. To optimize the system operating parameters molar ratio, initial concentration of copper, retentate pressure, pH, flow rate were monitored. The investigated results showed that copper removal increased with the increase in molar ratio; however flux decreased due to the formation of flocs. The removal was about 98%, when copper to SDS molar ratio was 1:30. With the increase in operating retentate pressure, flow rate, and initial concentration of copper; copper removal decreased in addition to decrease in flux. From the economical and removal point of view neutral water gave the better results. In terms of removal efficiency and permeate flux, flow rate of 40 ml/min, copper to SDS molar ratio of 1:30, and operating retentate pressure of 1.4 bars were found to be the optimum operating parameters within the experimental condition operated.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-539-001462514